SS Tube Fittings Manufacturers India
SS 316 tube fittings are precision compression connectors used to join two tubes, or two thin-walled pipes, without welding, brazing or threading the tube itself. Each fitting has a body, a nut and two ferrules. When the nut is tightened, the ferrules grip the tube and form a strong, leak-tight seal that holds firm under pressure, vibration and temperature changes. Just as important, the joint can be taken apart and remade many times without damaging the tube, which makes inspection, maintenance and system changes quick and simple. Made from 316 stainless steel, which contains 2–3% molybdenum, these fittings resist chlorides, seawater, acids and pitting far better than SS 304. SS 316 compression tube fittings are widely used in instrumentation and process lines, hydraulic and pneumatic systems, plumbing and electrical conduit, oil and gas, chemical and petrochemical plants, power generation, pharmaceuticals, food processing and marine equipment.
Aashish Metal is a trusted SS 316 tube fittings supplier in India, offering double ferrule fittings in inch and metric sizes from 1/8″ to 2″ and 3 mm to 50 mm. Complete your system with our SS 316 needle valves, SS 316 manifold valves, SS 316 ball valves and SS 316 pipes and tubes.
SS 316 Compression Tube Fittings, SS 316 Hydraulic Tube Fittings, Stainless Steel 316 Male Connector, 316 SS Twin Ferrule Fittings, UNS S31600 Male Elbow, DIN 1.4401 Female Elbow, 316 SS Bulkhead Union, 316 Stainless Steel Instrumentation Compression Fittings, SS 316 Tube to Union Suppliers in Mumbai India
SS 316 compression tube fittings and related components such as hydraulic fittings, male connectors, elbows, ferrule fittings and bulkhead unions are widely used across petrochemical plants, oil and gas facilities, power generation units, wastewater treatment systems and pharmaceutical processing lines. These fittings are preferred in demanding pipelines because 316 stainless steel offers high tensile strength, corrosion resistance and reliable performance at elevated temperatures, allowing the fittings to support stable flow and pressure conditions even when exposed to warm fluids or steam during operation.
The twin ferrule and single ferrule designs provide firm tube grip and leak-proof sealing, ensuring dependable performance in vibration-prone or high-pressure instrumentation systems. Products like UNS S31600 male elbows and DIN 1.4401 female elbows are manufactured with precise tolerances and smooth surface finishes to maintain accurate alignment and consistent sealing throughout the pipeline. For applications requiring enhanced weldability, stainless steel 316L tube fittings are also used due to their lower carbon content.
These fittings can be installed along the tubing line without internal stops, allowing flexible positioning and maintenance-friendly connections. In many control and measurement systems, 316 stainless steel instrumentation compression fittings help maintain system accuracy by preventing leakage and ensuring stable pressure transmission. Their combination of mechanical strength, temperature tolerance and durability makes them suitable for a wide range of industrial piping, control and instrumentation applications.
Technical Data
Stainless Steel 316 Tube Fittings Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
|---|---|---|---|---|---|---|---|---|---|
| SS 316 | 0.08 max | 2 max | 0.75 max | 0.045 max | 0.030 max | 16 – 18 | 2 – 3 | 10 – 14 | 0.10 max |
Stainless Steel 316 Tube Fittings Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2% Offset) | Elongation |
|---|---|---|---|---|
| 8.0 g/cm³ | 1400 °C (2550 °F) | Psi – 75000, MPa – 515 | Psi – 30000, MPa – 205 | 35 % |
Stainless Steel 316 Tube Fittings Sizes
SS 316 tube fittings are sized by the outside diameter (OD) of the tube, not by pipe size. Threaded ends such as NPT and BSP are sized separately, so a fitting is described as, for example, “1/4" OD tube × 1/2" NPT male connector”.
| Parameter | Size Range |
|---|---|
| Tube OD (inch) | 1/16" – 2" |
| Tube OD (metric) | 3 mm – 50 mm |
| Thread sizes | 1/16" – 2" NPT, BSPT, BSPP; metric threads M8 – M48 |
| Fitting type | Double ferrule (twin ferrule); single ferrule DIN 2353 on request |
| Working pressure | Up to about 6,000 psi, depending on tube size and wall thickness |
| Temperature | About –65 °C to +537 °C for SS 316 |
Inch Tube Sizes
| Tube OD (inch) | Tube OD (mm) | Common Thread Sizes |
|---|---|---|
| 1/16" | 1.59 | 1/16", 1/8" |
| 1/8" | 3.18 | 1/8", 1/4" |
| 3/16" | 4.76 | 1/8", 1/4" |
| 1/4" | 6.35 | 1/8", 1/4", 3/8", 1/2" |
| 5/16" | 7.94 | 1/4", 3/8" |
| 3/8" | 9.53 | 1/4", 3/8", 1/2" |
| 1/2" | 12.70 | 3/8", 1/2", 3/4" |
| 5/8" | 15.88 | 1/2", 3/4" |
| 3/4" | 19.05 | 1/2", 3/4", 1" |
| 7/8" | 22.23 | 3/4", 1" |
| 1" | 25.40 | 3/4", 1" |
| 1-1/4" | 31.75 | 1", 1-1/4" |
| 1-1/2" | 38.10 | 1-1/4", 1-1/2" |
| 2" | 50.80 | 1-1/2", 2" |
Metric Tube Sizes
3 mm, 4 mm, 6 mm, 8 mm, 10 mm, 12 mm, 14 mm, 15 mm, 16 mm, 18 mm, 20 mm, 22 mm, 25 mm, 28 mm, 30 mm, 32 mm, 38 mm, 42 mm and 50 mm.
Never mix inch and metric parts. A 6 mm tube and a 1/4" tube (6.35 mm) look almost the same, but they are not interchangeable and can leak or blow out if mixed.
Stainless Steel 316 Tube Fittings Chart
Fitting Types and Connections
| Fitting | Function | End Connections |
|---|---|---|
| Male Connector | Tube to female threaded port | Tube × Male NPT/BSPT |
| Female Connector | Tube to male threaded part | Tube × Female NPT/BSPT |
| Union | Joins two tubes of the same size | Tube × Tube |
| Reducing Union | Joins two tube sizes | Tube × Tube |
| Union Elbow | 90° turn between tubes | Tube × Tube |
| Male Elbow | 90° turn to a female port | Tube × Male |
| Female Elbow | 90° turn to a male thread | Tube × Female |
| Union Tee | Splits one line into two | Tube × Tube × Tube |
| Male Run Tee | Tee with male thread on the run | Tube × Male × Tube |
| Male Branch Tee | Tee with male thread on the branch | Tube × Tube × Male |
| Female Run / Branch Tee | Tee with a female thread | Tube × Female × Tube |
| Union Cross | Joins four tubes | Tube × 4 |
| Bulkhead Union / Connector | Passes tube through a panel | Tube × Tube / Thread |
| Male / Female Adapter | Tube stub to thread | Tube stub × Thread |
| Reducer | Steps down tube size | Tube stub × Tube |
| Tube Cap / Plug | Closes a tube or port | Single end |
| Front Ferrule / Back Ferrule / Nut | Sealing and gripping parts | – |
End Connection Chart
| End Type | Full Name | How It Seals |
|---|---|---|
| Tube OD | Compression tube end | Double ferrule |
| NPT | National Pipe Taper | Taper thread + sealant/tape |
| BSPT (R) | British Standard Pipe Taper | Taper thread + sealant |
| BSPP (G) | British Standard Pipe Parallel | Bonded washer or O-ring |
| Metric (M) | ISO metric parallel | Washer or O-ring |
| SAE / UNF | Unified fine thread | O-ring boss |
Related Types Of Stainless Steel 316 Instrumentation Tube Fittings
SS 316 Union Elbow
SS 316 Bulkhead Elbow
SS 316 Bulkhead Union
SS 316 Reducing Union
SS 316 Male Branch Tee
SS 316 Male Run Tee
SS 316 Male Elbow
SS 316 Bulkhead Male Connector
SS 316 Union Tee
SS 316 Reducing Union Tee
SS 316 Union Cross
SS 316 Male Connector
SS 316 Female Branch Tee
SS 316 Male Adapter
SS 316 Female Adapter
SS 316 Positionable Male Elbow
SS 316 Female Run Tee
SS 316 Female Elbow
SS 316 Bulkhead Female Connector
SS 316 Female Connector
SS 316 Front Ferrule
SS 316 Back Ferrule
SS 316 Tube End Closure
SS 316 Ferrule Nut
Stainless Steel 316 Tube Fittings Price in India
The price of SS 316 tube fittings depends on the fitting type, tube size, end connection, quantity and whether they are forged or machined from bar. Simple fittings such as unions and male connectors cost the least. Tees, crosses and bulkhead fittings cost more because they use more material and need more machining.
| SS 316 Fitting | 1/4″ / 6 mm | 1/2″ / 12 mm | 1″ / 25 mm |
| Male Connector | ₹150 – ₹300 | ₹300 – ₹600 | ₹1,000 – ₹2,000 |
| Female Connector | ₹180 – ₹350 | ₹350 – ₹700 | ₹1,100 – ₹2,200 |
| Union | ₹180 – ₹350 | ₹350 – ₹700 | ₹1,200 – ₹2,400 |
| Union Elbow | ₹300 – ₹550 | ₹600 – ₹1,100 | ₹1,800 – ₹3,500 |
| Union Tee | ₹400 – ₹750 | ₹800 – ₹1,500 | ₹2,500 – ₹4,500 |
| Union Cross | ₹550 – ₹1,000 | ₹1,100 – ₹2,000 | Price on Request |
| Bulkhead Union | ₹350 – ₹650 | ₹700 – ₹1,300 | Price on Request |
| Ferrule Set (front + back) | ₹30 – ₹60 | ₹60 – ₹120 | ₹200 – ₹400 |
| Factor | Effect on Price |
| Fitting type | Tees, crosses and bulkheads cost more than unions |
| Size | Larger tube sizes need more material and machining |
| Grade | SS 316 costs more than SS 304 because it contains molybdenum |
| Making method | Forged bodies cost more than bar-stock bodies |
| Quantity | Higher volumes lower the per-piece price |
| Testing | Hydro tests, PMI or third-party inspection add cost |
For a complete instrument line, see our SS 316 needle valves and SS 316 manifold valves.
Frequently Asked Questions on Stainless Steel 316 Tube Fittings
SS 316 tube fittings offer excellent corrosion resistance, high tensile strength and stable performance at elevated temperatures. They are ideal for chemical processing, oil and gas, instrumentation lines and fluid control systems where leak-proof and vibration-resistant connections are essential.
Yes. SS 316 compression tube fittings are designed for secure sealing in high-pressure and high-vibration environments. Their twin-ferrule grip ensures leak-tight performance in hydraulic and instrumentation applications.
Both grades offer corrosion resistance, but stainless steel 316L tube fittings contain lower carbon, making them preferred for welded systems. 316L reduces carbide precipitation and maintains strength in high-temperature conditions.
Yes. Grade 316 contains molybdenum, which significantly improves resistance to chlorides, making these fittings suitable for marine, offshore and chemical environments.
Common types include male and female connectors, elbows, unions, bulkhead fittings, hydraulic tube fittings, single ferrule and double ferrule designs, and instrumentation compression fittings.
Absolutely. Their temperature stability, sealing integrity and corrosion resistance make them ideal for pressure gauges, flow measurement lines, control panels and analytical systems.
Choose the size based on tube OD, pressure rating, medium compatibility and temperature conditions. If unsure, consult the fitting specification chart or request technical assistance for accurate selection.
For More Information About Stainless Steel 316 Instrumentation Fittings please call +91-22-66362223 / 66394926 or send an email to export@aashishmetal.com
Products
Please feel free to contact us. We will get back to you with 2 business days. Or just call us now.


