Monel 400 Pipe Fittings
Monel 400 Butt weld Elbow, Alloy 400 Cross, DIN 2.4360 Butt weld Pipe Fittings Manufacturer in India, UNS N04400 Butt weld Fittings, Monel 400 Pipe Fittings Stockist In India.
Aashish Metal & Alloys is a popular supplier and stockist of Monel Alloy 400 Pipe Fittings, which are used to healthy immediately stop hose or pipe.
They are used for various applications consisting of in Boiler, Super Heaters, Condensers, Coolers/Inter-coolers, Heat Exchangers, Chilling Plants, etc. Monel Alloy UNS N04400 Stub End Pipe Fittings also are utilized in exceptional industries consisting of Oil Refineries, Fertilizer Plants, Sugar Industry, Steel Plants, etc. It is one of the maximum often used for throttling gadgets within the refrigeration systems. The predominant gain is that it could be joined in an instantaneous way to a further becoming devoid of getting to apply a delivered quick linking piece known as a pipe nipple.
- Monel 400 Pipe Fittings Specifications
- Monel 400 Pipe Fittings Equivalent Grades
- Monel 400 Pipe Fittings Quality and Test reports
- Monel 400 Pipe Fittings International Standards
- Related Types Of Monel 400 Pipe Fittings
- Monel 400 Pipe Fittings Dimensions Standard
- Monel 400 Pipe Fittings Thickness Chart
- Chemical Composition
- Mechanical Properties
- Monel 400 Pipe Fittings Price List
- We supply of variety Monel 400 Pipe Fittings
- Application Of Monel 400 Pipe Fittings
Monel® Alloy 400 Weld Fittings, Monel® Alloy 400 Bend, Monel 400 Pipe Nipples, ASTM B366 Alloy 400 Tee, ANSI B16.9 Alloy 400 Butt weld Fittings, Monel Alloy 400 Pipe Cap, Monel 400 Reducer, Nickel Alloy 400 Stub End, Alloy 400 Long & Short Radius Elbow Suppliers in India.
It may be utilized in drainage, sewers, water supply, vents, compressed air and fueloline lines, critical vacuum systems, sump pump drains, HVAC, and every other region wherein plumbing fittings can also additionally possibly be used to attach exceptional components of pipe. Monel Alloy WNR 2.4361 Long Stub End Pipe Fittings are defined as a cap stop of unfinished tubes which can be being utilized in a remarkable quantity of industries. Also, they may be again and again plated within the employer of nickel or chrome for a higher end and advanced resistance to corrosion. It is a span of heterosexual pipe via way of way of getting male threads on each the ends.
Also, it could be known as a connector or a coupling threaded this is located on each the ends. They are typically used to permit plumbing to be related to a water heater or different plumbing systems. Nickel-Alloy 400 Short Stub End Pipe Fittings is a type of becoming paraphernalia this is being designed in this kind of way for to sign up for pipes that may be disconnected without inflicting any bend to the pipes. Any form of small diameter piping correlations wanting a fantastic seal and smooth congregation further to disassembly are made from via the assist of those pipes. In different words, it could positioned out of area pipes by means of having none difficulty.
Monel 400 Pipe Fittings Specifications
| Specifications | ASTM B366/ ASME SB366 |
|---|---|
| Size | 400 Seamless Butt Weld Fittings : 1/2″ – 10″ 400 Welded Butt Weld Fittings : 1/2″ – 48″ |
| Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 |
| Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
| Type | DN15-DN1200 |
| Connection | Welding |
| Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom ASTM B366 Grade 400 Pipe Fitting |
| Size Range | ½” NB to 24″ NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) |
| Form | 90 Elbow, 45 Elbow, Long Radius Elbow, Short Radius Elbow, Concentric Reducer, Eccentric Reducer, Equal Tee, Unequal Tee, Lateral Tee, Cross, Bends 1.5d, 3d, 5d, 10d, U bend, 180 Deg Bend, Short Stub End, Long stub end, End Cap, Dish Cap |
| Manufacturing process | Push, Press, Forge, Cast, etc. |
| Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Origin & Mills | Japanese, Indian, USA, Korean, European, Ukraine, Russian |
Monel 400 Pipe Fittings Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
|---|---|---|---|---|---|---|---|
| Monel 400 | 2.4360 | N04400 | NW 4400 | NA 13 | МНЖМц 28-2,5-1,5 | NU-30M | NiCu30Fe |
Monel 400 Pipe Fittings Quality and Test reports
- Third Party Inspection
- EN 10204/3.1B
- 100% Radiography Test
- Raw Materials Certificate
- Mill test
Monel 400 Pipe Fittings International Standards
| Standard Code | Standard Name |
|---|---|
| American Steel Pipe Fittings Standard | |
| ANSI ASME SA-403 | Forged Durimet pipe fittings |
| ANSI ASME B16.9 | Factory-Made wrought steel pipe fittings |
| ANSI ASME B16.28 | Wrought steel butt-welding short radius elbows and returns |
| ISO 5251 | Stainless steel butt-welding fittings |
| MSS SP-43 | Wrought stainless steel butt-welding fittings |
| MSS SP-75 | Forging butt-welding fittings |
| German Steel Pipe Fittings Standard | |
| DIN 2605 | Steel butt-welding pipe fittings.elbows and bends |
| DIN 2615 | Steel butt-welding pipe fittings.tees |
| DIN 2616 | Steel butt-welding pipe fittings.reducers |
| DIN 2617 | Steel butt-welding pipe fittings.caps |
| Japanese Steel Pipe Fittings Standard | |
| JIS B2311 | Universal steel butt-welding pipe fittings |
| JIS B2312 | Steel butt-welding pipe fittings |
| JIS B2313 | Steel plate butt-welding pipe fittings |
| Other Steel Pipe Fittings Standard | |
| EN 1025 | 3 Butt-welding pipe fittings |
We Supplied a Comprehensive Range Of Monel 400 Pipe Fittings
Related Types Of Monel 400 Pipe Fittings
Monel 400 Butt weld Elbow
- Monel Alloy 400 Butt weld Elbow
- Monel 400 3D Elbow
- DIN 2.4360 LR Pipe Elbow
- Alloy 400 45 Deg. Elbow
- UNS N04400 Pipe Elbow
- Alloy 400 Butt weld Elbow
- Monel 400 90 Degree Elbow
- Monel 400 180 Degree Elbow
Monel 400 Butt weld Tees
- UNS N04400 Butt weld Tee
- Monel 400 Pipe Tee
- Monel 400 Reducing Tee
- DIN 2.4360 Butt weld Tees
- Monel 400 Equal Tee
- Monel 400 Buttweld Tees
- 400 Monel Unequal Tee
- Monel 400 Butt weld Seamless Tee
Monel 400 Butt weld Cross
- Monel 400 Butt weld Seamless Cross
- 400 Monel Pipe Cross
- 400 Monel Unequal Cross
- Monel 400 Equal Cross
- DIN 2.4360 Butt weld Cross
- Monel 400 Buttweld Cross
- UNS N04400 Butt weld Cross
- Monel 400 Reducing Cross
Monel 400 Butt weld Pipe Cap
- UNS N04400 Butt weld Cap
- Monel 400 End Cap
- DIN 2.4360 Butt weld Cap
- 400 Monel Pipe End Cap
- Monel 400 Pipe Cap
- Monel 400 Butt weld Seamless Cap
- 400 Monel Pipe Cap
- Monel 400 End Pipe Cap
Monel 400 Butt weld Stub End
- Monel 400 Stub Ends
- 400 Monel Lap Joint Stub End
- Monel 400 Short Stub End
- Monel 400 Butt weld Seamless Stub End
- 400 Monel Long Stub End
- DIN 2.4360 Butt weld Stub End
- UNS N04400 Butt weld Stub End
- Monel 400 Stub Ends
Monel 400 Butt weld Pipe Bend
- Monel 400 Piggable Bend
- 400 Monel Butt weld U Pipe Bend
- 400 Monel Hot Induction Bend
- Monel 400 Pipe Bend
- Monel 400 Pipe Bend
- DIN 2.4360 Butt weld Seamless Bend
- UNS N04400 Butt weld Bend
- 400 Monel Long Radius Bend
Monel 400 Butt weld Reducer
- Monel 400 Eccentric Reducer
- 400 Monel Reducer
- UNS N04400 Butt weld Reducer
- DIN 2.4360 Butt weld Reducer
- Monel 400 Butt weld Seamless Reducer
- Monel 400 Pipe Reducers
- Monel 400 Reducers
- 400 Monel Concentric Reducers
Monel 400 Butt weld Return Bends
- 400 Monel U Bend
- DIN 2.4360 Pipe Return Bend
- Monel 400 180 Degree Return Bend
- Monel 400 Buttweld Return Bend
- Monel 400 Long Radius Return Bend
- UNS N04400 Butt weld Return Bend
- Monel 400 Weld Return Bend
- Monel 400 Butt weld Seamless Return Bend
Monel 400 Pipe Fittings Dimensions Standard
| Nominal Pipe Size |
Outside Diameter |
Caps | Straight Tees | Straight Crosses | Stub Ends | |||
|---|---|---|---|---|---|---|---|---|
| (inches) | (mm) | (inches) | Length (inches) |
Center to End (inches) |
Center to End (inches) |
Lap Diameter (inches) |
Long Length (inches) |
Short Length (inches) |
| 1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
| 3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
| 1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
| 1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
| 2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
| 2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
| 3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
| 3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
| 4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
| 5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
| 6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
| 8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
| 10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
| 12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
Monel 400 Pipe Fittings Thickness Chart
| Product range and theoretical weights (kg) | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| DN | Schedule 10S | Schedule 40S | Schedule 80S | ||||||
| 900 Elbow | 450 Elbow | Equal tee | 900 Elbow | 450 Elbow | Equal tee | 900 Elbow | 450 Elbow | Equal tee | |
| 8 | 0.02 | 0.01 | 0.03 | 0.03 | 0.02 | 0.06 | 0.04 | 0.03 | 0.07 |
| 10 | 0.03 | 0.02 | 0.05 | 0.03 | 0.02 | 0.03 | 0.06 | 0.04 | 0.09 |
| 15 | 0.06 | 0.03 | 0.09 | 0.08 | 0.04 | 0.10 | 0.10 | 0.05 | 0.14 |
| 20 | 0.07 | 0.03 | 0.13 | 0.08 | 0.04 | 0.17 | 0.11 | 0.05 | 0.20 |
| 25 | 0.14 | 0.08 | 0.28 | 0.15 | 0.11 | 0.29 | 0.22 | 0.14 | 0.38 |
| 32 | 0.23 | 0.11 | 0.49 | 0.26 | 0.17 | 0.59 | 0.40 | 0.23 | 0.68 |
| 40 | 0.30 | 0.17 | 0.68 | 0.40 | 0.23 | 0.86 | 0.51 | 0.29 | 1.02 |
| 50 | 0.50 | 0.25 | 0.85 | 0.70 | 0.4 | 1.28 | 0.91 | 0.59 | 1.59 |
| 65 | 0.85 | 0.48 | 1.41 | 1.40 | 0.77 | 2.19 | 1.81 | 0.99 | 3.13 |
| 80 | 1.25 | 0.63 | 1.77 | 2.20 | 1.08 | 3.31 | 2.97 | 1.50 | 4.45 |
| 90 | 1.70 | 0.75 | 2.67 | 2.83 | 1.42 | 4.08 | 4.00 | 2.00 | 5.44 |
| 100 | 2.10 | 1.08 | 3.46 | 4.47 | 2.09 | 5.27 | 6.18 | 2.81 | 7.71 |
| 150 | 5.45 | 2.72 | 8.07 | 10.89 | 5.44 | 10.99 | 16.32 | 8.16 | 13.61 |
| 200 | 10.20 | 5.33 | 15.65 | 21.54 | 10.77 | 20.91 | 33.11 | 16.56 | 28.12 |
| 250 | 18.15 | 9.75 | 26.46 | 38.56 | 19.27 | 35.38 | 51.71 | 25.86 | 49.90 |
| 300 | 25.80 | 13.62 | 39.46 | 59.42 | 29.71 | 62.14 | 79.38 | 39.69 | 83.91 |
We Keep Bulk Stock Of Monel 400 Pipe Fittings At Our Stockyard, Contact Us For Free Sample & Stock List.
Chemical Composition of Monel 400 Pipe Fittings
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
|---|---|---|---|---|---|---|---|
| Monel 400 | 0.30 max | 2.00 max | 0.50 max | 0.024 max | 28.00 – 34.00 | 2.50 max | 63.00 min |
Mechanical Properties of Monel 400 Pipe Fittings
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|---|---|
| Monel 400 | 8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80,000 , MPa – 550 | Psi – 35,000 , MPa – 240 | 40 % |
For Monel 400 Pipe Fittings price list
Request the latest Monel 400 Pipe Fittings List. Please click on the request a quote button or click here to request the updated price list and ready stock information along with your requirement. Aashish Metal & Alloys maintains a stock of all standard items and can export them at best price for Monel 400 Butt weld Fittings.
We supply of variety Monel 400 Pipe Fittings
Aashish Metal & Alloys is a Highly Acclaimed Manufacturer & suppliers of Monel 400 Pipe Fittings offering all varieties in all types of Monel 400 in all sizes, with more then 52 countries worldwide.
| Monel 400 Seamless Pipe Fittings | Monel 400 Welded Pipe Fittings |
| 400 Monel Short Radius Elbow | ANSI B16.9 Monel 400 Long Radius Elbows |
| Monel 400 Pipe Fittings Price List | Monel 400 Butt weld Fittings |
| Monel 400 Equal & Unequal Tee | Monel® Alloy 400 Pipe Fittings |
| 400 Monel 45 Degree Elbows | Monel 400 Reducers |
| Monel 400 Butt weld Pipe Fittings | UNS N04400 Steel Pipe Cap |
| Nickel Alloy 400 Cross | Monel 400 90 Degree Elbow |
| UNS N04400 Long Stub End | Monel 400 Reducing Nipple Expoter |
| 400 Monel® Alloy Stub End | Alloy 400 3D, 5D Elbow |
| 400 Monel 180 Deg Elbows | ASME/ANSI B16.9 Monel 400 Concentric Reducers |
| WERKSTOFF NR. 2.4360 Butt weld Fittings | Monel® Alloy 400 Eccentric Reducers |
| Monel 400 Pipe Nipples | Monel 400 Bends |
| Monel 400 90° LR Elbow | Alloy 400 Butt weld Elbow Stock |
| Monel 400 Two Joint Pipe Fittings | ASTM B16.9 Monel 400 Seamless Pipe Fittings |
| ASTM B16.9 Monel 400 Welded Fittings | ASTM B16.9 Monel 400 Caps |
| Monel 400 Pipe Fittings Manufacturers in India | 400 Monel Lateral Tee |
| ASME B16.9 Monel 400 10D Elbow | 400 Monel Two Halve Butt weld Fittings |
| ASME B16.9 Monel 400 Buttweld Fittings | Monel® Alloy 400 Short Stub End Supplier |
| ANSI B16.9 Monel 400 Buttweld Fittings Price List In India | Monel 400 Reducer |
Application Of Monel 400 Pipe Fittings
Application Industry
For More Information About Monel 400 Pipe Fittings please call +91-22-66362223 / 66394926 or send an email to export@aashishmetal.com
Export Country
MIDDLE EAST Saudi Arabia | AFRICA Nigeria NORTH AMERICA Usa | EUROPE Russia | ASIA India SOUTH AMERICA Argentina |
Products
Special Products
PRODUCT RANGE
Please feel free to contact us. We will get back to you with 2 business days. Or just call us now.
