Angle Type Globe Valve Supplier
1/2″ to 20″ | Class 150 to 300 | Bronze to Nickel Alloy Grades | Mill Certified
- 90-degree body pattern replaces a separate globe valve and elbow fitting
- Bronze, ductile iron, cast iron/steel and stainless grades in stock
- Bellow sealed, extended bonnet and heating jacket options available
- Pressure tested with EN 10204 3.1/3.2 mill certification
An angle type globe valve is what you get when you take a standard globe valve and turn the outlet 90 degrees to the inlet, which lets the valve do the work of both a globe valve and an elbow fitting at once. At Aashish Metals, we manufacture and supply these valves because that single change genuinely earns its place on a lot of piping layouts: the curved internal bore gives a lower flow coefficient and less pressure drop than pushing flow through a standard globe body and a separate elbow, and the design copes noticeably better with pulsating flow. We build angle type globe valves in bronze and ductile iron for marine and fire-fighting duty, in cast iron and cast steel (WCB, CF8, CF8M) for general industrial service, and in stainless steel, duplex and super duplex, Monel, Hastelloy and Titanium where the media is corrosive or the service is critical. Sizes run from 1/2″ up to 20″, in pressure classes 150 through 300, and where the medium tends to crystallise or thicken, a heating jacket or packing flush can be added to keep it flowing. Every valve is pressure tested, supplied with an EN 10204 3.1/3.2 mill test certificate, and can be qualified to NACE MR0175 for acidic or sour service on request.
- Material Specification Chart Of Angle Type Globe Valve
- Angle Type Globe Valve Quality and Test reports
- Angle Type Globe Valve Surface Coating
- Material of Construction for Angle Type Globe Valve
- Related Types Of Angle Type Globe Valve
- Dimensions Of Angle Type Globe Valve
- Pressure Rating
- For Angle Type Globe Valve price list
- We supply of variety Angle Type Globe Valve
- Application Of Angle Type Globe Valve
What Is an Angle Type Globe Valve, and Why Use One?
A standard globe valve is a straight-through valve, so turning a line 90 degrees near one means fitting a separate elbow before or after it. An angle type globe valve builds that turn into the valve body itself, with the inlet and outlet at right angles to each other. That does more than save a fitting: the curved internal flow path gives a lower flow coefficient and less pressure drop than routing flow through a straight globe valve and a separate elbow, and the design holds up noticeably better under pulsating flow, which is why it turns up so often on steam, condensate and reciprocating-pump discharge lines.
Handling Media That Crystallises or Thickens
Where the process fluid tends to solidify, crystallise or thicken as it cools, an angle globe valve can be fitted with a heating jacket or a packing flush connection to keep the media moving through the valve body rather than building up around the seat and stem.
It has Molybdenum content material comprised in its chemical composition that stops particular sorts of corrosion and in standard improves its corrosion resistance. They are being utilized in a variety of distinct industries which includes in Brewing, Dairy, Chemical Industry, Food processing, Petrochemicals, Marine equipment, Pharmaceuticals, and so on. They are being utilized in various applications which includes in pumps, condensers, valves, fasteners, warmth exchangers, marine fittings, filters, petro chemical equipment, stress vessels, paper and pulp machinery, etc. They are non-hardenable by means of warmth treatment, and additionally may be shaped and drawn by means of having a suitable grace.
Meanwhile, its miles an opportunity and modifications by means of having low carbon content material, further to low yield and tensile strengths to a few extent. It offers a more desirable weldability and as nicely minimizes the choice of low corrosion resistance within the place of welded areas. It has suitable resistance to oxidation below strong temperatures to 2000 Deg F. However, cyclic paperwork condense its oxidation resistance, and a maximum functioning temperature of 1900 Deg F is by means of and huge advised if biking is engaged. It is typically diagnosed as marine grade alloy due to its amplified resistance to chloride corrosion, which similarly makes it very suitable product for the utilization in salt water atmospheres.
Disc Types and Body Patterns
- Plug disc: the standard choice for general on/off and light throttling duty
- Needle disc: gives fine, precise flow control for low-flow, high-accuracy applications
- Swivel disc: reduces wear between disc and seat by allowing the disc to self-align on closing
- Regulating disc: shaped specifically for continuous flow modulation rather than simple isolation
- Angle pattern: inlet and outlet at 90 degrees, the configuration this page covers
- Y-type pattern: seat set at an angle within an otherwise straight body, an alternative way to reduce pressure drop without a full 90-degree turn
Construction Options
- Bonnet: bolted as standard; welded or pressure-seal bonnet for high-pressure or leak-critical service; extended bonnet for cryogenic applications, keeping the packing away from extreme cold
- Bellow sealed design: eliminates stem packing entirely for zero-emission, fugitive-leak-free service, available with 304, 321, 316Ti, Alloy 625 or C276 bellows
- Heating jacket: keeps viscous or crystallising media flowing through the valve body
- Seating: soft or metal seated, with renewable seats and hard-faced (Stellite/HF) options for erosive or high-cycle duty
- Operation: handwheel as standard; gear-operated or electric/pneumatic actuated on request
- End connections: butt weld, socket weld, threaded, flanged or hub end
Angle Type Globe Valve Material Specification
Specification | Details |
|---|---|
Size Range | 1/2″ to 20″ (DN15 to DN500) |
Pressure Class | 150, 200, 300 (higher classes on request) |
Design Standard | BS 1873, ASME B16.34, DIN 3356, EN 13709, API 6D |
Testing Standard | API 598, API 6D, DIN 3230, EN 12266, ISO 5208 |
Face-to-Face | ASME B16.10, API 6D, DIN 3202, EN 558-1, ISO 5752 |
Suitable Temperature | -29°C to 425°C, depending on material and seat |
Media | Fresh water, sewage, air, vapour, food, medicine, oils, alkalis, salt solutions |
Acidic / Sour Service | NACE MR0175 qualification available |
Body / Chest Materials | Ductile Iron, Cast Iron Fg260, Cast Steel WCB, CF8, CF8M, and duplex/nickel alloy grades on request |
Gate / Disc Materials | AISI SS304, 316, 316L, 317, 317L |
Ends | Flanged, Lugged, Butt Weld, Socket Weld, Screwed |
Port | Standard round; V-port or diamond port optional |
Operation | Handwheel, gear operated, or electric actuated |
Related Types Of Angle Type Globe Valve
Bronze Angle Type Globe Valve
Stainless Steel Angle Type Globe Valve
Cast Iron Angle Type Globe Valve
Stainless Steel Right Angle Globe Valve
Grade Cross-Reference by Component
Larger cast steel angle globe valves are commonly specified by grade family across every wetted component. This table lines up the common options:
Component | WCB Family | CF8 Family | CF3M Family |
|---|---|---|---|
Body / Bonnet / Yoke / Disc | WCB, LCB, WC6 | CF8, CF8M | CF3, CF3M |
Stem / Gland | F6a, F304 | F6a, F304 | F316, F304L |
Seat / Seat Ring | A105 + STL, SS304 | F11 + STL, SS304 | SS316, SS304L |
Packing | Graphite / PTFE | Graphite / PTFE | Graphite / PTFE |
Bonnet Gasket | B7/H, L7/4 | B16/4 | B8/8 |
Suitable Medium | Water, oil, general gas (W.O.G.) | Nitric / acetic acid, oxidising media | Urea and similar process media |
Approx. Suitable Temperature | -29°C to 340°C | -196°C to 427°C | -196°C to 315°C |
This is a simplified reference; exact grade, temperature and medium compatibility should always be confirmed against your specific process conditions before ordering.
Bill of Materials, Ductile Iron / Bronze Construction
Part | Material | Standard |
|---|---|---|
Body | Ductile Iron | A536 |
Body Seat Ring | Cast Bronze | B62 |
Disc / Disc Seal | Ductile Iron / Cast Bronze | A536 / B62 |
Disc Guide | Ductile Iron | A536 |
Piston Ring | Alloy Cast Iron | — |
Body Gasket / Body Seat Gasket | Graphite | — |
Bonnet | Ductile Iron | A536 |
Gland Follower | Ductile Iron | A536 |
Packing | Die-Formed Compressed Graphite | — |
Packing Gland | Cast Brass | B62 |
Bolts / Nuts | Steel | A193 B7 / A194 2H |
Stem | Stainless Steel | AISI 410 |
Stem Nut | Cast Brass | B62 |
Handwheel | Cast Iron | A126 B |
Drain Plug | Stainless Steel | 304 |
Dimensions (mm), Class 150
Size (Inch) | Size (mm) | Face-to-Face (B) | Flange Dia. (D) | Height (H) |
|---|---|---|---|---|
1 | 25 | 127 | 108 | 260 |
2 | 50 | 203 | 152 | 330 |
4 | 100 | 292 | 229 | 470 |
6 | 150 | 407 | 280 | 570 |
10 | 250 | 623 | 407 | 768 |
20 | 500 | 978 | 699 | 1220 |
Class 200 and Class 300 dimension tables, plus pressure-versus-temperature ratings for cast iron classes 125 and 250, are available in our downloadable spec sheet.
Quality, Testing & Certification
- Third-party inspection available: BV, SGS, TÜV, Lloyd’s
- EN 10204 3.1 / 3.2 mill test certificate with heat-number traceability
- 100% radiography testing on request
- Raw material test certificate and positive material identification (PMI)
- NACE MR0175 qualification for acidic or sour service on request
We Supplied a Comprehensive Range Of Angle Type Globe Valve
We supply of variety Angle Type Globe Valve
Aashish Metal & Alloys is a Highly Acclaimed Manufacturer & suppliers of Angle Type Globe Valves offering more than 3000 varieties in all types of Angle Type Globe Valves in all sizes, with more then 52 countries worldwide.
| 90 Deg Angle Pattern Valves | Alloy 20 Angle Type Globe Valve |
| SS 316 Angle Type Globe Valve | Nickel Alloy Angle Type Globe Valves |
| Stainless Steel 304 Angle Type Globe Valves | Angle Type Globe Valve at Best Price in India |
| Angle Control Global Valve | Angle Type Globe Valve Standard |
| Right Angle Globe Valve Stockist | SS 316L Angle Type Globe Valves |
| Angle Type Globe Valve Stockist | Class 300 Bronze Angle Globe Valve |
| Incoloy Angle Type Globe Valve | Industrial Angle Type Globe Valves at Best Price in India |
| SS 304L Angle Type Globe Valves Manufacturer | Class 200 Bronze Angle Globe Valve |
| Monel Angle Type Globe Valves | Angle Type Globe Valves Stockist In Mumbai |
| Hastelloy Angle Type Globe Valves | CS Angle Type Globe Valve |
| Class 150 Angle Globe Valves | Alloy Steel Angle Type Globe Valve |
| Titanium Angle Type Globe Valve | SMO 254 Angle Type Globe Valve |
| Cast Steel Angle Globe Valve | Angle Type Globe Valves Flanged End |
| Copper Nickel Angle Type Globe Valves In Mumbai | 100 MM Cast Steel Angle Type Globe Valve |
| Angle Type Globe Valve Exporter | Cast Iron Angle Globe Valve |
| Angle Type Globe Valve Dealer | ASME B16.34 Bronze Angle Globe Valve |
| Angle Globe Valve | Super Duplex Steel Angle Type Globe Valves |
| 25 MM Angle Globe Valve | Flanged Angle Globe Valve |
Angle Type Globe Valve Applications & Industries
- Marine and Fire Fighting Systems: bronze and ductile iron angle globe valves
- Power Generation: steam and condensate lines where pulsating flow is common
- Oil & Gas and Petrochemical Processing: corrosive and high-pressure service
- Pulp & Paper and Chemical Processing: acidic and oxidising media with NACE-qualified grades
- Pharmaceutical and Food Processing: hygienic, corrosion-resistant stainless grades
Application Of Angle Type Globe Valves
Application Industry
FAQ’s About Angle Type Globe Valve
PRODUCT RANGE
Products
Special Products
Please feel free to contact us. We will get back to you with 2 business days. Or just call us now.
