Copper Nickel Fasteners Supplier and exporter in India

Home > Copper Nickel Products > Copper Nickel Sheets and Plates

Copper nickel sheets and plates are flat metal products used in marine equipment, heat exchangers, condensers and desalination systems exposed to seawater. Aashish Metals offers 90/10 copper nickel (UNS C70600) and 70/30 copper nickel (UNS C71500) for industrial fabrication requirements. The 90/10 grade contains approximately 10% nickel, while the 70/30 grade contains approximately 30% nickel, with iron and manganese contributing to their material properties. Both grades have a typical density of around 8.94 g/cm³ and offer good resistance to seawater corrosion and biofouling. These copper nickel sheets and plates are selected for components such as tubesheets, water boxes and marine cladding, with grade selection based on service conditions, fabrication requirements and project specifications.

Technical data

Specifications of Copper Nickel Sheets & Plates

ParameterDetail
SpecificationsASTM B171, B122 / ASME SB171, SB122. B171 for pressure vessels, condensers and heat exchangers; B122 for general plate, sheet, strip and rolled bar.
StandardsASTM B171, B122; ASME SB171, SB122; EN 10204 3.1 certificate
SizeThickness 1 mm to 100 mm; width up to 1500 mm; length up to 3000 mm
FinishingHot rolled plate (HR), cold rolled sheet (CR), mill finish, pickled
FormSheet, plate, cut to size, circles (blanks) and rings
HardnessSoft (annealed), half hard (H02), hard (H04)
GradeUNS C70600 (Cu-Ni 90/10), UNS C71500 (Cu-Ni 70/30)

Types of Copper Nickel Sheets/Plates

Cold Rolled Plates
Cold Rolled Plates
Cold Rolled Sheets
Cold Rolled Sheets
Hot Rolled Plates
Hot Rolled Plates
Hot Rolled Sheets
Hot Rolled Sheets
Polished Plates
Polished Plates
Shim Sheets & Plates
Shim Sheets & Plates

Applications of Copper Nickel Sheets and Plates

Copper nickel sheets and plates are used in equipment where seawater exposure and corrosion resistance are important considerations.

  • Heat exchanger tubesheets: Used in heat exchanger construction where the material is exposed to seawater and requires corrosion resistance.
  • Condenser components: Selected for condenser parts in marine and power generation systems handling cooling water.
  • Desalination equipment: Used in suitable equipment and fabricated components exposed to saline water.
  • Shipbuilding and hull sheathing: Applied in marine construction where resistance to seawater corrosion and biofouling is required.
  • Offshore splash zone components: Considered for suitable components exposed to seawater spray and changing marine conditions.
  • Seawater piping equipment: Used to fabricate associated plates, water boxes and components in seawater handling systems.

The required grade depends on seawater velocity, operating conditions, component design and the applicable material specification. Contact Aashish Metals with your material and dimensional requirements.

Frequently Asked Questions

They are used for heat exchanger and condenser tubesheets, water boxes, desalination equipment, shipbuilding and hull sheathing, and offshore splash zone cladding, wherever seawater would corrode steel.

We supply 90/10 (UNS C70600) and 70/30 (UNS C71500). Grade 90/10 suits condensers and general marine use, while 70/30 is stronger and more resistant to erosion.

ASTM B171 covers plate and sheet for pressure vessels, condensers and heat exchangers. ASTM B122 covers copper nickel plate, sheet, strip and rolled bar for general use. Specify the one your project requires.

Standard sheet sizes include 1250 x 2500 mm, 1219 x 2438 mm and 1500 x 3000 mm, and we cut to size on request. Send us your thickness, width and length and we confirm what we can supply.

Multiply the thickness in mm by 8.94 to get kg per square meter. A 10 mm plate weighs about 89.4 kg per square meter, so a 1250 x 2500 mm sheet weighs about 279 kg.

Yes. It welds with matching copper nickel filler and forms well cold or hot. Keep tools free of steel contamination and follow the procedure for your grade and thickness.

Request a Quote for Copper Nickel Sheets & Plates

Aashish Metals can assist with enquiries for 90/10 and 70/30 copper nickel sheets and plates. Share your drawing or material requirement so the grade, dimensions and applicable standard can be reviewed before quotation.

Similar products

Products

Have Any Questions ?

Please feel free to contact us. We will get back to you with 2 business days. Or just call us now.

 

logo

Aashish Metal & Alloys is a well known Manufacturer , Stockiest, Supplier and Exporter of Raw materials like Long Radius Bends, Compression Tube Fittings, Pipe Fittings, Forged Fittings, Flanges, Shims & Plates, Fasteners, Pipes & tubes, round Bars & Wire etc.

Mumbai - 400 004.
(Mon - Sat)
(10am - 07 pm)
Enquire Now
close slider

    Get In Touch

    Your information will be securely sent to and stored in Google Sheets for the purpose of processing your form submission.