Copper Nickel Fasteners Supplier and exporter in India
Home > Copper Nickel Products > Copper Nickel Fasteners
Copper nickel fasteners are used to secure equipment, pipework and structural components in marine, offshore and seawater applications where corrosion resistance is important. The range includes copper nickel bolts, nuts, stud bolts, screws, washers and threaded rods in 90/10 (UNS C70600) and 70/30 (UNS C71500) grades. These cupro nickel fasteners are selected according to the required strength, dimensions, thread form and service conditions. Aashish Metals supplies copper nickel fasteners for industrial procurement requirements, with grade specific options for different marine and offshore duties.
Technical data
Specifications of Copper Nickel Fasteners
| Parameter | Detail |
|---|---|
| Specifications | ASTM B 151 / ASME SB 151 |
| Dimensions | ASME B18.2.1, B18.2.2, ISO 4014, 4017, 4032; DIN 931, 933, 934 |
| Size | M4 to M100 / 1/4 inch to 4 inch |
| Length | 3 mm to 200 mm |
| Grade | UNS C70600 (Cu-Ni 90/10), UNS C71500 (Cu-Ni 70/30) |
| Type of Fasteners | Hex bolts, stud bolts, hex nuts, washers, socket screws, threaded rods, set screws |
Chemical Composition of Cu-Ni Fasteners
| Grade | Cu | Ni | Fe | Mn | Zn max | Pb max |
|---|---|---|---|---|---|---|
| Cu-Ni 90/10 (C70600) | balance (88.6 min) | 9.0 to 11.0 | 1.0 to 1.8 | 1.0 max | 1.0 | 0.05 |
| Cu-Ni 70/30 (C71500) | balance (65.0 min) | 29.0 to 33.0 | 0.40 to 1.00 | 1.0 max | 1.0 | 0.05 |
Copper Nickel Fasteners Mechanical Properties
| Property | Cu-Ni 90/10 (C70600) | Cu-Ni 70/30 (C71500) |
|---|---|---|
| Density | 8.94 g/cm³ (0.323 lb/in³) | 8.94 g/cm³ (0.323 lb/in³) |
| Melting range | 1100 to 1145 °C | 1170 to 1240 °C |
| Tensile strength (annealed, typical) | about 275 MPa (40,000 psi) | about 370 MPa (54,000 psi) |
| Yield strength 0.2% (annealed, typical) | about 105 MPa (15,000 psi) | about 140 MPa (20,000 psi) |
| Elongation (typical) | 30% min | 30% min |
Equivalent Grades of Cu-Ni Fasteners
| Common name | UNS | Werkstoff No. | EN designation |
|---|---|---|---|
| Cu-Ni 90/10 | C70600 | 2.0872 | CuNi10Fe1Mn |
| Cu-Ni 70/30 | C71500 | 2.0882 | CuNi30Mn1Fe |
Types of Copper Nickel Fasteners
Applications of Copper Nickel Fasteners
Copper nickel fasteners are used where components need secure mechanical connections while exposed to seawater, marine conditions and coastal environments. Their corrosion resistance makes them suitable for several applications:
- Shipbuilding and Naval Equipment: Used to secure marine fittings, pipe supports, brackets and equipment exposed to seawater.
- Offshore Platforms: Used in suitable fastening assemblies for offshore equipment and marine service installations.
- Desalination Plants: Used in seawater intake, treatment and distribution equipment where corrosion resistance is required.
- Seawater Cooling Systems: Used to fasten compatible components in cooling water lines and associated equipment.
- Subsea and Splash Zone Hardware: Selected for suitable marine assemblies exposed to seawater and repeated wetting.
- Coastal Power Plants: Used in equipment and piping installations that handle seawater for cooling and utility services.
Aashish Metals supplies copper nickel needle valves for varied industrial requirements.
Frequently Asked Questions
Copper nickel fasteners secure equipment and pipework in marine, seawater, offshore and desalination applications where resistance to corrosion and marine fouling is important.
Aashish Metals supplies 90/10 copper nickel fasteners (UNS C70600) and 70/30 copper nickel fasteners (UNS C71500) for different marine service requirements.
70/30 contains more nickel and generally offers higher strength and better erosion resistance. Both grades provide good resistance to seawater corrosion.
The range can include copper nickel bolts, nuts, stud bolts, threaded rods, screws, washers and special fasteners, subject to Aashish Metals’ supply range.
Sizes run from M4 to M100 (1/4 to 4 inch) in metric, UNC and UNF threads, with lengths from 3 mm to 200 mm. Send your drawing or size list and we confirm availability in the quotation.
No. Copper nickel alloys do not gain strength through conventional heat treatment. Higher strength is generally achieved through cold working and depends on temper and size.
Request a Quote for Copper Nickel Fasteners
Other Products
Products
Please feel free to contact us. We will get back to you with 2 business days. Or just call us now.


