Duplex and Super Duplex Steel Round Bars Manufacturer and Supplier in India
Home > Copper Nickel Products > Copper Nickel Fasteners
Duplex and super duplex round bars are solid stainless steel bars with a mixed ferrite and austenite structure, which gives high strength and good resistance to chloride corrosion. Duplex and super duplex round steel bars are characterized by unique microstructure, which combines such qualities as high level of hardness, toughness and ability to resist chloride corrosion. There are different types of these steel bars, such as UNS S31803, S32205, S32750 and S32760. These bars are available in hot rolled, forged, peeled, turned and bright condition. These steel bars are used in marine equipment, chemical processing machinery, offshore structure and pumps. Aashish Metals is an experienced manufacturer and supplier of Duplex and Super Duplex Steel Round Bars in India.
Technical data
Specifications of Duplex and Super Duplex Steel Round Bars
| Parameter | Detail |
|---|---|
| Grades | Duplex S31803 and S32205 (2205, EN 1.4462); Super Duplex S32750 (2507, EN 1.4410) and S32760 (EN 1.4501) |
| Standards | ASTM A276, ASTM A479, ASTM A484, EN 10088-3, NACE MR0175 / ISO 15156 |
| Forms | Solid round bar and rod; hot-rolled, forged, peeled, turned, bright drawn, and centreless ground |
| Diameter Range | 6 mm to 350 mm (exact range depends on grade and finish) |
| Lengths | Random lengths (3,000 mm to 6,000 mm), fixed lengths, and precision cut-to-length pieces |
| Heat Treatment | Solution annealed and rapidly quenched |
| Testing | EN 10204 3.1 MTC, PMI, ferrite scope check, ultrasonic testing (UT), ASTM A923, ASTM G48 |
Chemical Compositions of Duplex and Super Duplex Steel Round Bars
| Element | UNS S31803 | UNS S32205 | UNS S32750 | UNS S32760 |
|---|---|---|---|---|
| Carbon (C) | 0.030 max | 0.030 max | 0.030 max | 0.030 max |
| Manganese (Mn) | 2.00 max | 2.00 max | 1.20 max | 1.00 max |
| Silicon (Si) | 1.00 max | 1.00 max | 0.80 max | 1.00 max |
| Phosphorus (P) | 0.030 max | 0.030 max | 0.035 max | 0.030 max |
| Sulfur (S) | 0.020 max | 0.020 max | 0.020 max | 0.010 max |
| Chromium (Cr) | 21.00 to 23.00 | 22.00 to 23.00 | 24.00 to 26.00 | 24.00 to 26.00 |
| Nickel (Ni) | 4.50 to 6.50 | 4.50 to 6.50 | 6.00 to 8.00 | 6.00 to 8.00 |
| Molybdenum (Mo) | 2.50 to 3.50 | 3.00 to 3.50 | 3.00 to 5.00 | 3.00 to 4.00 |
| Nitrogen (N) | 0.08 to 0.20 | 0.14 to 0.20 | 0.24 to 0.32 | 0.20 to 0.30 |
| Copper (Cu) | Not specified | Not specified | 0.50 max | 0.50 to 1.00 |
| Tungsten (W) | Not specified | Not specified | Not specified | 0.50 to 1.00 |
Duplex and Super Duplex Steel Round Bars Mechanical Properties
| Property | UNS S31803 | UNS S32205 | UNS S32750 | UNS S32760 |
|---|---|---|---|---|
| Tensile Strength | 620 MPa min | 655 MPa min | 800 MPa min | 750 MPa min |
| Yield Strength (0.2% Offset) | 450 MPa min | 450 MPa min | 550 MPa min | 550 MPa min |
| Elongation (in 50 mm / 4D) | 25% min | 25% min | 15% min | 25% min |
| Hardness (Brinell) | 290 HB max | 290 HB max | 310 HB max | 270 HB max |
Standards That Apply to Duplex and Super Duplex Round Bars
| Standard | Scope and Coverage |
|---|---|
| ASTM A276 | Standard specification for stainless steel bars and shapes for general engineering and corrosion-resistant service. |
| ASTM A479 | Standard specification for stainless steel bars and shapes for use in boilers and other pressure-retaining vessels. |
| ASTM A484 | General requirements for stainless steel bars, billets, and forgings, including dimensional tolerances, straightness, and marking. |
| EN 10088-3 | European technical delivery conditions for semi-finished products, bars, rods, wire, and sections of corrosion-resisting steels. |
| ASTM A923 | Test methods for detecting detrimental intermetallic phases (such as sigma phase) in duplex austenitic/ferritic stainless steels. |
| ASTM G48 | Standard test methods for pitting and crevice corrosion resistance of stainless steels using ferric chloride solution (Methods A, C, E). |
| NACE MR0175 / ISO 15156 | Material requirements, maximum hardness limits, and heat-treatment rules for H2S-containing sour environments in oil and gas production. |
Weight Chart of Duplex & Super Duplex Steel Round Bars
| Diameter (mm) | Weight (kg/m) | Diameter (mm) | Weight (kg/m) | Diameter (mm) | Weight (kg/m) |
|---|---|---|---|---|---|
| 10 | 0.61 | 32 | 6.27 | 75 | 34.46 |
| 12 | 0.88 | 40 | 9.80 | 100 | 61.26 |
| 16 | 1.57 | 50 | 15.32 | 125 | 95.72 |
| 20 | 2.45 | 60 | 22.05 | 150 | 137.84 |
| 25 | 3.83 | 63.5 | 24.70 | 200 | 245.04 |
Types of Duplex & Super Duplex Steel Round Bars
Applications and Industrial Uses of Duplex & Super Duplex Steel Round Bars
- Offshore Oil and Gas Industry
- Subsea Equipment Manufacturing
- Marine Engineering Industry
- Desalination Plant Equipment
- Chemical Processing Industry
- Pulp and Paper Processing Industry
- Oil Refinery Equipment Manufacturing
- Power Generation Industry
Frequently Asked Questions
Duplex and super duplex steel round bars are stainless steel products with a mixed austenitic-ferritic structure, offering high strength and corrosion resistance.
Super duplex steel has higher chromium, molybdenum and nitrogen content, providing greater strength and corrosion resistance than standard duplex steel.
Both are super duplex stainless steel grades. S32760 contains additional elements such as copper and tungsten, which improve resistance to certain forms of corrosion.
Yes. Both offer good resistance to seawater corrosion, while super duplex grades provide enhanced resistance to pitting and crevice corrosion.
Common finishes include hot-rolled, forged, peeled, turned, polished and bright finishes.
Weight per metre (kg) = 0.006165 × Diameter², where the diameter is measured in millimetres. This is an approximate formula using a density of 7.85 g/cm³.
Products
Please feel free to contact us. We will get back to you with 2 business days. Or just call us now.


