Copper Nickel Instrumentation Ball Valve Supplier

Home > Copper Nickel Products > Copper Nickel Instrumentation Ball Valves Supplier

Copper nickel instrumentation ball valves are small bore, forged brass, quarter-turn ball vales manufactured from 90/10 (UNS C70600) and 70/30 (UNS C71500), which are used in instrument and sampling lines to carry seawater. The buyers of these ball valves include shipyards, offshore operators, desalination plants, and power generation plants. Aashish Metals supplies both types of copper nickel instrumentation ball valves with threaded or tube compression or socket welded ends and each valve can be delivered with an EN 10204 3.1 certificate. As a supplier of copper nickel instrumentation ball valves, we manufacture according to grade, size, end connections, and pressure requirements.

Technical data

Copper Nickel Instrumentation Ball Valves Specifications

ParameterDetail
StandardMSS SP-99 / SP-110. Test: API 598, ISO 5208. Material: ASTM B151. Certificate: EN 10204 3.1
Valve Size1/8" to 2" / 6 mm to 50 mm
ConnectionThreaded, tube compression, socket weld
Function2-way (on/off), 3-way (diverter), per order
Pressure Rating1,500 / 3,000 / 6,000 psi at room temperature
Seal Ring MaterialPTFE, PVDF, Delrin, PEEK, Graphite
StandardISO, DIN, ANSI, API, ASME, AWWA, MSS
MediaSeawater, brackish water, cooling water, compressed air, hydraulic oil. Not for ammonia, sulphide or oxidising acids.
Media Temperature-30 °C to 200 °C, seat dependent; PTFE seat limit applies
Body TypeBar Stock

Types of Duplex Steel Instrumentation Ball Valves

Applications of Copper Nickel Instrumentation Ball Valves

Copper Nickel Instrumentation Ball Valves are used in industrial systems that require dependable flow control and resistance to corrosion. Aashish Metals supplies these valves for applications across various industries, including:

  • Shipbuilding and naval: seawater cooling and ballast lines need valves that resist corrosion and marine growth.
  • Offshore platforms: instrument and sampling lines face constant salt spray and seawater contact.
  • Desalination: brine and seawater feed lines are highly corrosive and demand long life.
  • Seawater cooling: condenser and heat exchanger instrument lines depend on stable, fouling resistant materials.
  • Power plant seawater systems: coastal plants use seawater for cooling, and downtime is costly.
  • Aquaculture and coastal process plants: copper nickel stands up to seawater with low maintenance.

Contact our team to discuss your specifications, sizes and project requirements.

Frequently Asked Questions

They are small bore, quarter turn ball valves made from copper nickel alloy, either 90/10 or 70/30. They isolate or control flow in instrument lines, and they are used mainly in seawater and marine service.

We supply 90/10 (UNS C70600) and 70/30 (UNS C71500). Grade 90/10 suits general seawater duty, while 70/30 has higher strength and better erosion resistance for harsher service.

Grade 70/30 has about 30 percent nickel against about 10 percent for 90/10, which gives higher strength and better erosion resistance. Both resist seawater corrosion and marine fouling.

The size range and end connections for each grade are listed on its grade page, including threaded, tube compression and socket weld options. Send us your size and connection and we will confirm availability when we quote.

The rating depends on size, grade and seat material, and it falls as temperature rises. We provide a pressure and temperature chart for each valve on request.

Bar stock follows ASTM B151, design follows MSS SP 99 or SP 110, and testing follows API 598 or ISO 5208. Each order ships with an EN 10204 3.1 certificate.

Request a Quote for Copper Nickel Instrumentation Ball Valves

Looking for a reliable source for Copper Nickel Instrumentation Ball Valves? Aashish Metals can assist with your supply requirements across different sizes and specifications. Share your technical requirements, quantity and delivery details with our team to receive a quotation for your project.

Other Products

Products

Have Any Questions ?

Please feel free to contact us. We will get back to you with 2 business days. Or just call us now.

 

logo

Aashish Metal & Alloys is a well known Manufacturer , Stockiest, Supplier and Exporter of Raw materials like Long Radius Bends, Compression Tube Fittings, Pipe Fittings, Forged Fittings, Flanges, Shims & Plates, Fasteners, Pipes & tubes, round Bars & Wire etc.

Mumbai - 400 004.
(Mon - Sat)
(10am - 07 pm)
Enquire Now
close slider

    Get In Touch

    Your information will be securely sent to and stored in Google Sheets for the purpose of processing your form submission.