Beryllium Copper UNS C17200 Strips / Coils

These alloys can undergo graphitization at higher temperatures and this can result in very low properties. Carbon content control is important when operating temperatures are apt to be above 600 °C. In hot-water systems, in which steam is mixed with air and carbon dioxide, the corrosion rates may be high initially but normally decrease with time as a protective coating forms. Copper beryllium strip is made into a beryllium copper coil that exhibits high resistance to a wide variety of reducing chemicals and a large resistance to caustic alkalies, but is usually restricted in service to temperatures below 600 o C. In such situations, where sourcing and specification are required, the suppliers of beryllium copper strips who have been in the business long enough could provide assistance in choosing the most appropriate tempers and finishes in beryllium copper strip or c17200 strip to ensure the performance.

These materials offer high electrical conductivity along with reliable electrical, magnetostrictive, and thermal properties. They also provide good corrosion resistance in natural and distilled water and solid resistance in alkaline and neutral salt solutions. Additional benefits include notable resistance to dry fluorine and widespread use for handling caustic soda, plus measured resistance to sulfuric and hydrochloric acids at moderate concentrations and temperatures. UNS C17200 Strips & Coils are typically recommended for service up to 600 °F, with a melting range of approximately 2615 °F to 2635 °F, making beryllium strip and related grades a practical, durable choice for demanding applications.