Monel 400 Instrumentation Tube Fittings Supplier & Stockist
Monel 400 Instrumentation Tube Fittings Manufacturer, Stockist and Supplier of Alloy 400 Single Ferrule, Double Ferrule and Compression Tube Fittings
Aashish Metal and Alloys is a company that focuses on providing high-integrity Monel 400 Instrumentation Tube Fittings that are designed to serve the most demanding process and fluid handling requirements. Our products are of the same quality demanded in chemical, marine, and hydrocarbon processing, where there is no compromise on the quality of corrosion resistance.
Being a famous Stockist of Monel Alloy 400 Instrumentation Tube Fittings, we comprehend the necessity of systems that are reliable and do not leak. The material is a Nickel-Copper alloy, denoted as UNS N04400, which is highly strong and ductile and cannot be affected by media like sea water, reducing acids as well as salts in a large range of temperatures. Such high performance qualifies Monel 400 Fittings to be used in caustic and high-temperature environments.
Aashish Metal & Alloys operates as a prime Manufacturer and Supplier of the limited Monel 400 Tube Fittings as well as the complementary Monel 400 Pipe Fittings because of the material coverage of the entire project. Alloy 400 Compression Fittings is our main strength in high-performance Single Ferrule and Double Ferrule designs. These designs incorporating Monel $2.4360$ Instrument Fittings have demonstrated reliability as compared to the conventional welded connections and hence less time and complexity have been incurred in installing the designs. Alloy 400 material per se is designed to have good weldability and thermal conductivity properties and thus can be used in cold-working conditions.
In cases where the resistance to very aggressive agents, e.g., hydrofluoric acid and hydrogen fluoride, is needed, our Monel 400 Instrumentation Fittings offer the required confidence to the boiling point of the fluid. Our products, such as Buttweld and Elbow components are of high quality and we have strict quality assurance as our products uphold the international standards such as ASTM B366. Collaborate with us in distributing UN S N04400 products that are tested on quality at competitive factory prices in Mumbai, India.
- Monel 400 Tube Fittings Specifications
- Monel 400 Compression Fittings Equivalent Grades
- Monel 400 Tube Fittings Quality and Test reports
- Related Types Of Monel 400 Instrumentation Tube Fittings
- Alloy 400 Instrumentation Tube Fittings Pressure Rating
- Chemical Composition
- Mechanical Properties
- Monel 400 Instrumentation Tube Fittings price list
- We supply of variety Monel 400 Instrumentation Tube Fittings
- Application Of Monel 400 Compression Tube Fittings
Monel 400 Male Connector, Alloy 400 Hydraulic Tube Fittings, UNS N04400 Male Elbow, Monel 400 Tube to Union, 400 Monel Bulkhead Union, DIN 2.4360 Female Elbow and Monel 400 Twin Ferrule Tube Fittings Supplier in India
The Monel 400 Instrumentation Tube Fittings (WNR 2.4360 / UNS N04400) are designed to perform well in high temperature conditions and have great oxidation resistance for long-term metallurgical stability. Strong mechanical properties of the material, which are its key features, are what make it the solution of choice in high-demand fluid transfer systems, such as those used in water supply pipelines and in industrial transfer systems that can be specialized, such as business food processing pipelines.
Our Monel Alloy WNR 2.4360 Instrumentation Tube Fittings are accurately designed product that offers the solution of leak-tight, self-strengthening fittings. The strong-built design of the connection, particularly in parts such as 400 Monel Bulkhead Union and the much-needed Monel 400 Tube to Union, provides secure installation and the reliability of the long-term integrity. Our product is a complete assortment of configurations required in complex piping systems, and includes precision-machined flow parts, such as the UNS N04400 Male Elbow and the DIN 2.4360 Female Elbow.
Its versatility, which is the ability to be used even in high-pressure settings, has such an extension as the Monel 400 Alloy with Hydraulic Tube Fittings and Monel 400 Twin Ferrule Tube Fittings, which are in our product range. Such diversity guarantees our ability to fulfill all the system requirements, including the regular connections such as the Monel 400 Male Connector as well as specialized assemblies. Moreover, in the case of a weld-end connection, the integrity of the welds can be checked with the help of non-destructive testing, such as ultrasound and radiography tests to ensure zero-leak performance.
Through our strict adherence to critical specifications such as ASTM B366 (which is one of the critical specifications commonly emphasized by our competitors), we are confident our product line, including our specialized Monel 400 Twin Ferrule Tube Fittings, will provide the best critical product line performance and dimension accuracy to all critical applications. We still concentrate on the high-quality engineering of all Monel 400 parts as provided.
Monel 400 Tube Fittings Specifications
| Specifications | ASTM B366 / ASME SB366 |
|---|---|
| Size | 1/16 in. to 2 in. & 2mm to 50 mm. |
| Dimensional Range | 1/16 to 2 inches (imperial); 2 to 50 mm (metric) |
| Working Pressures | Upto 2000 to 6000 PSI |
| Thread Type | NPT – ASME B1.20.1, SAE AS71051 | ISO/BSP Parallel – ISO 228 | ISO/BSP Tapered – ISO 7, BS EN 10226-1 | SAE (Unified) – ASME B1.1 |
| End Connections | NPT, ISO/BP, SAE/MS, AN, weld ends, port connectors, sanitary flanges, tube adapters |
| Types | Tube to Union, Tube to Male, Tube to Female, Instrument Pipe Fittings, Accessories |
| Equivalent To | SWAGELOK, PARKER, DK-LOK, HOKE |
| Max Working Pressure | 8MPa | 1200psi Depending on The Tubing Material |
| Working Temperature | -40°C—250°C | -40°F—482°F Depending on The Tubing Material |
| Configurations | Straights, elbows, tees, crosses, caps, plugs, nuts and ferrules Chromatograph and Column End |
| Tube Fitting uses & application | |
| Material Test Certificates (MTC) for Tube Fitting as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
Monel 400 Compression Fittings Equivalent Grades
| STANDARD | UNS | WNR. | JIS | BS | GOST | AFNOR | EN |
|---|---|---|---|---|---|---|---|
| Monel 400 | N04400 | 2.4360 | NW 4400 | NA 13 | МНЖМц 28-2,5-1,5 | NU-30M | NiCu30Fe |
Monel 400 Tube Fittings Quality and Test reports
- Third Party Inspection
- Radiography Test
- Hydrostatic Shell Test
- Pneumatic Seat Test
- Pitting Resistance Test
- Hydrostatic Test
We Supplied a Comprehensive Range Of 400 Monel Tube Fittings
Related Types Of Monel 400 Instrumentation Tube Fittings
Monel 400 Union Elbow
Monel 400 Bulkhead Elbow
Monel 400 Bulkhead Union
Monel 400 Reducing Union
Monel 400 Male Branch Tee
Monel 400 Male Run Tee
Monel 400 Male Elbow
Monel 400 Bulkhead Male Connector
Monel 400 Union Tee
Monel 400 Reducing Union Tee
Monel 400 Union Cross
Monel 400 Male Connector
Monel 400 Female Branch Tee
Monel 400 Male Adapter
Monel 400 Female Adapter
Monel 400 Positionable Male Elbow
Monel 400 Female Run Tee
Monel 400 Female Elbow
Monel 400 Bulkhead Female Connector
Monel 400 Female Connector
Monel 400 Front Ferrule
Monel 400 Back Ferrule
Monel 400 Tube End Closure
Monel 400 Ferrule Nut
Monel 400 Instrumentation Tube Fittings Pressure Rating
| NPT/ISO Pipe Size in. | Tube Fittings | |
|---|---|---|
| Male | Female | |
| psig (bar) | psig (bar) | |
| 1/16 | 11 000 (757) | 6 700 (461) |
| 1/8 | 10 000 (689) | 6 500 (447) |
| 1/4 | 8 000 (551) | 6 600 (454) |
| 3/8 | 7 800 (537) | 5 300 (365) |
| 1/2 | 7 700 (530) | 4 900 (337) |
| 3/4 | 7 300 (502) | 4 600 (316) |
| 1 | 5 300 (365) | 4 400 (303) |
| 1 1/4 | 6 000 (413) | 5 000 (344) |
| 1 1/2 | 5 000 (344) | 4 600 (316) |
| 2 | 3 900 (268) | 3 900 (268) |
| OD | OD Actual | Thread Designation – Nominal Size | Thread per inch | |
|---|---|---|---|---|
| (fraction inch) | (inches) | (inches) | NPT | BSP |
| 5/16 | 0.3125 | 1/16 | 27 | 28 |
| 13/32 | 0.405 | 1/8 | 27 | 28 |
| 35/64 | 0.540 | 1/4 | 18 | 19 |
| 43/64 | 0.675 | 3/8 | 18 | 19 |
| 27/32 | 0.840 | 1/2 | 14 | 14 |
| 1-3/64 | 1.050 | 3/4 | 14 | 14 |
| 1-5/16 | 1.315 | 1 | 11-1/2 | 11 |
| 1-21/32 | 1.660 | 1-1/4 | 11-1/2 | 11 |
| 1-29/32 | 1.900 | 1-1/2 | 11-1/2 | 11 |
| 2-3/8 | 2.375 | 2 | 8 | 11 |
| 2-7/8 | 2.875 | 2-1/2 | 8 | 11 |
| 3-1/2 | 3.5 | 3 | 8 | 11 |
| 4 | 4.0 | 3-1/2 | 8 | 11 |
| 4-1/2 | 4.5 | 4 | 8 | 11 |
| 5-5/8 | 5.563 | 5 | 8 | 11 |
| 6-5/8 | 6.625 | 6 | 8 | 11 |
We Keep Bulk Stock Of Monel 400 Compression Fittings At Our Stockyard, Contact Us For Free Sample & Stock List.
Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
|---|---|---|---|---|---|---|---|
| Monel 400 | 0.30 max | 2.00 max | 0.50 max | 0.024 max | 28.00 – 34.00 | 2.50 max | 63.00 min |
Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|---|---|
| Monel 400 | 8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80,000 , MPa – 550 | Psi – 35,000 , MPa – 240 | 40 % |
Monel 400 Instrumentation Tube Fittings price list
Request the latest Monel 400 Instrumentation Tube Fittings List. Please click on the request a quote button or click here to request the updated price list and ready stock information along with your requirement. Aashish Metal & Alloys maintains a stock of all standard items and can export them at best price for 400 Monel Tube Fittings.
We supply of variety Monel 400 Instrumentation Tube Fittings
Aashish Metal & Alloys is a Highly Acclaimed Manufacturer & suppliers of Monel 400 Instrumentation Tube Fittings offering all varieties in all types of 400 Monel in all sizes, with more then 52 countries worldwide.
| Monel 400 Bulkhead Union Distributor | Monel 400 Reducing Union Manufacturer |
| Monel 400 Tube To Male Fittings | Monel® Alloy 400 Tube To Union |
| Monel® Alloy 400 Hydraulic Fittings | Alloy 400 Double Ferrule Fittings Supplier |
| UNS N04400 Imperial Tube Fittings | Monel JIS NW 4400 Male Connector |
| DIN 2.4066 Push-Connect Tube Fittings | Alloy 400 Single Ferrule Fittings Stockist |
| 400 Monel Tube To Female Pipe | Nickel Alloy 400 Flared Tube Fittings Exporter |
| Alloy 400 Instrumentation Fittings | ASTM B366 Monel 400 NPT Fittings |
| Monel Alloy 400 Parker Tube Fittings | Monel Alloy 400 Swagelok Tube Fittings |
| Monel 400 Ferrule Fittings | ASME SB 366 Monel 400 Female Branch Tee |
| Monel Alloy 400 Union Elbow | Monel 400 Compression Tube Fittings |
| DIN 2.4066 Union Cross | 400 Monel Back Ferrule Fittings |
| Nickel Alloy 400 Female Connector | Monel® Alloy 400 Tube Plug Dealer |
| Monel 400 Industrial Tube Fittings Price | 400 Monel Alloy Reducing Union Tee |
| Monel 400 Compression Tube Fittings | Monel 400 Tube Fittings |
| UNS N04400 Male Adapter | Monel® Alloy 400 Tube End Closure |
| Monel 400 45 Deg Positionable Male Elbow | Nickel Alloy 400 Bulkhead Reducing Union |
| UNS N04400 Bulkhead Elbow | Alloy 400 90 Deg Male Adapter |
Application Of Monel 400 Compression Tube Fittings
Application Industry
Why Choose Aashish Metals Monel 400 Tube Fittings
Aashish Metals is a leading Manufacturer, Stockist, and Supplier of high-performance nickel alloy specialty, providing direct access to the performance-oriented materials that your projects need. We have a large standing ready-to-ship stock of Monel 400 Tube Fittings, so that when you need just a UNS N04400 Male Connector, or you need to buy a lot of Alloy 400 Compression Fittings, we are ready to take your order. We have decades of experience in the metal industry, but we have also acquired the technical requirements of the marine, chemical, and oil and gas markets, and are a dependable provider of custom-designed Monel 400 Instrumentation Fittings.
The quality is confirmed by the fact that we follow the international standards thoroughly, with the ability to trace them completely and certify them (chorale compliance with the WNR 2.4360 standards and ASTM B366 standards). With innovative manufacturing methods, we are able to provide products such as our precision Monel 400 Twin Ferrule Tube Fittings that have a record of better performance in leak-free functions and durability that is very high compared to the industry standards. We also provide access to high quality fittings at the best price in the market because we have control over the whole supply chain. Select Aashish Metals because of Specialist knowledge, assurance of quality and a commitment relationship aimed at the success and effectiveness of your critical fluid transfer systems.
For More Information About Monel 400 Instrumentation Fittings please call +91-22-66362223 / 66394926 or send an email to export@aashishmetal.com
Frequently Asked Questions about Monel 400 Tube Fittings
SS 316 tube fittings offer excellent corrosion resistance, high tensile strength and stable performance at elevated temperatures. They are ideal for chemical processing, oil and gas, instrumentation lines and fluid control systems where leak-proof and vibration-resistant connections are essential.
Yes. SS 316 compression tube fittings are designed for secure sealing in high-pressure and high-vibration environments. Their twin-ferrule grip ensures leak-tight performance in hydraulic and instrumentation applications.
Male connectors, tube to union, bulkhead union, male elbows, female elbows, hydraulic tube fittings as well as compression fittings with single/double ferrule are generally in demand across industries.
Fittings are supplied as per material grades UNS N04400 / DIN 2.4360, ensuring dimensional accuracy, proper ferrule performance and reliable sealing integrity.
The ferrule mechanism gives accurate tube gripping and contact on surfaces, which guarantee reliability of sealing in the presence of vibration, changes in pressure and temperature fluctuation.
They are employed in the chemical processing and petrochemical facilities, oil and gas plants, instrumentation lines and high-corrosion fluid transfer systems.
These fittings would typically have a consistent long-term operation and performance and need little maintenance since the Monel Alloy 400 has a high intrinsic corrosion resistance.
Export Country
MIDDLE EAST Saudi Arabia | AFRICA Nigeria NORTH AMERICA Usa | EUROPE Russia | ASIA India SOUTH AMERICA Argentina |
Products
Special Products
PRODUCT RANGE
Please feel free to contact us. We will get back to you with 2 business days. Or just call us now.
