Alloy Steel A234 WP11 Pipe Fittings

ASTM A234 WP11 PIPE FITTINGS, A234 WP11 ELBOW STOCKIST IN INDIA.

Aashish Metal & Alloys is a popular exporter and trader of AS A234 WP11 Pipe Fittings, which are termed for the reason of the advanced carbon model of the alloy.

They are the extended carbon composition form and indicates higher excessive temperature and creep characteristics. They are used for a few typical applications in company of the High temperature chemical processes, High temperature steam carrier, Heat exchanger tubes, etc. Alloy Steel ASTM A234 WP11 Reducer Pipe Fittings also are utilized in High stress steam pipes, Boiler tubes, Radiant super-heaters, General refinery piping, Heavy responsibility exhaust systems, and so on. They are austenitic, stabilized and chromium metallic that incorporates columbium and we could for the elimination of carbide precipitation, and, subsequently, intergranualr corrosion.

ASTM A234 CrMo WP11 ALLOY STEEL A234 WP11 TEE, ALLOY STEEL A234 WP11 REDUCER SUPPLIERS IN INDIA.

They are frequently used for the production of system that must be positioned in carrier below stern corrosive states, and are as properly pretty trendy to the petroleum refining industries.It became advanced for higher creep resistance and additionally for extended strength at temperatures better than 537°C. Common applications are Aerospace – piston engine manifolds, Chemical Processing, Expansion Joints, Food Processing – system and storage, and so on. ASTM A234 Alloy Steel WP11 Concentric Reducer Pipe Fittings are a stabilized austenitic steel within the organization of outstanding trendy corrosion resistance. It has a number of the terrific resistance to intergranular corrosion after coming in touch to temperatures within the chromium carbide precipitation that tiers from 427 – 816°C.

It is a molybdenum that incorporates low carbon austenitic steel within the organization of amplified accessories of nickel, molybdenum and chromium. It is supposed for advanced corrosion resistance and augmented resistance to chemical hit for sulphurous, acetic, formic, and tartaric and citric acids. They are gives resistance to sensitization whilst welded and advanced strain to rupture, tensile strength, and creep at excessive temperatures. ASME SA 234 Alloy Steel WP11Eccentric Reducer Pipe Fittings gives terrific excessive temperature tensile, strain-rupture and creep strengths, at the side of a few terrific weldability and formability. They are resistant from sensitization, and consequently they may be very tons often utilized in heavy gauge welded parts.

ALLOY STEEL A234 WP11 Pipe Fittings Specifications

SpecificationsASTM A234/ ASME SA234
Size
WP11 Seamless Butt Weld Fittings : 1/2″ – 10″
WP11 Welded Butt Weld Fittings : 1/2″ – 48″
DimensionsASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10
ThicknessSCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75
TypeDN15-DN1200
ConnectionWelding
Bending RadiusR=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Size Range½” NB to 24″ NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100)
Form90 Elbow, 45 Elbow, Long Radius Elbow, Short Radius Elbow, Concentric Reducer, Eccentric Reducer, Equal Tee, Unequal Tee, Lateral Tee, Cross, Bends 1.5d, 3d, 5d, 10d, U bend, 180 Deg Bend, Short Stub End, Long stub end, End Cap, Dish Cap
Manufacturing processPush, Press, Forge, Cast, etc.
Test CertificatesEN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Origin & MillsJapanese, Indian, USA, Korean, European, Ukraine, Russian

ALLOY STEEL A234 WP11 Pipe Fittings Quality and Test reports

ALLOY STEEL A234 WP11 Pipe Fittings International Standards

Standard Code Standard Name
American Steel Pipe Fittings Standard
ANSI ASME SA-403 Forged Durimet pipe fittings
ANSI ASME B16.9 Factory-Made wrought steel pipe fittings
ANSI ASME B16.28 Wrought steel butt-welding short radius elbows and returns
ISO 5251 Stainless steel butt-welding fittings
MSS SP-43 Wrought stainless steel butt-welding fittings
MSS SP-75 Forging butt-welding fittings
German Steel Pipe Fittings Standard
DIN 2605 Steel butt-welding pipe fittings.elbows and bends
DIN 2615 Steel butt-welding pipe fittings.tees
DIN 2616 Steel butt-welding pipe fittings.reducers
DIN 2617 Steel butt-welding pipe fittings.caps
Japanese Steel Pipe Fittings Standard
JIS B2311 Universal steel butt-welding pipe fittings
JIS B2312 Steel butt-welding pipe fittings
JIS B2313 Steel plate butt-welding pipe fittings
Other Steel Pipe Fittings Standard
EN 1025 3 Butt-welding pipe fittings

We Supplied a Comprehensive Range Of ALLOY STEEL A234 WP11 Pipe Fittings

Buy ALLOY STEEL A234 WP11 Butt weld Fittings only From PED Approved Manufacturer
Butt weld Elbow
ALLOY STEEL A234 WP11 Butt weld Elbow
  • Alloy Steel A234 WP11 Pipe Elbow
  • Alloy Steel A234 WP11 90 Degree Elbow
  • A234 WP11 Alloy Steel 45 Deg. Elbow
  • Alloy Steel A234 WP11 180 Degree Elbow
  • Alloy Steel A234 WP11 Butt weld Elbow
  • Alloy Steel A234 WP11 LR Pipe Elbow
  • Alloy Steel A234 WP11 Butt weld Elbow
  • Alloy Steel A234 WP11 3D Elbow
Butt weld Tee
ALLOY STEEL A234 WP11 Butt weld Tees
  • Alloy Steel A234 WP11 Butt weld Tee
  • Alloy Steel A234 WP11 Equal Tee
  • A234 WP11 Alloy Steel Unequal Tee
  • Alloy Steel A234 WP11 Reducing Tee
  • Alloy Steel A234 WP11 Butt weld Tees
  • Alloy Steel A234 WP11 Pipe Tee
  • Alloy Steel A234 WP11 Butt weld Seamless Tee
  • Alloy Steel A234 WP11 Buttweld Tees
Butt weld Cross
ALLOY STEEL A234 WP11 Butt weld Cross
  • Alloy Steel A234 WP11 Butt weld Cross
  • Alloy Steel A234 WP11 Equal Cross
  • A234 WP11 Alloy Steel Unequal Cross
  • Alloy Steel A234 WP11 Reducing Cross
  • A234 WP11 Alloy Steel Butt weld Cross
  • A234 WP11 Alloy Steel Pipe Cross
  • Alloy Steel A234 WP11 Butt weld Seamless Cross
  • Alloy Steel A234 WP11 Buttweld Cross
Butt weld Pipe Cap
ALLOY STEEL A234 WP11 Butt weld Pipe Cap
  • Alloy Steel A234 WP11 Butt weld Cap
  • Alloy Steel A234 WP11 H Pipe Cap
  • A234 WP11 Alloy Steel Pipe End Cap
  • Alloy Steel A234 WP11 H End Cap
  • A234 WP11 Alloy Steel Butt weld Cap
  • A234 WP11 Alloy Steel Pipe Cap
  • Alloy Steel A234 WP11 Butt weld Seamless Cap
  • Alloy Steel A234 WP11 End Pipe Cap
Butt weld Stub End
ALLOY STEEL A234 WP11 Butt weld Stub End
  • Alloy Steel A234 WP11 Butt weld Stub End
  • Alloy Steel A234 WP11 H Stub Ends
  • A234 WP11 Alloy Steel Long Stub End
  • Alloy Steel A234 WP11 H Short Stub End
  • A234 WP11 Alloy Steel Butt weld Stub End
  • A234 WP11 Alloy Steel Lap Joint Stub End
  • Alloy Steel A234 WP11 Butt weld Seamless Stub End
  • Alloy Steel A234 WP11 Stub Ends
Butt weld Pipe Bend
ALLOY STEEL A234 WP11 Butt weld Pipe Bend
  • Alloy Steel A234 WP11 Butt weld Bend
  • Alloy Steel A234 WP11 Pipe Bend
  • A234 WP11 Alloy Steel Long Radius Bend
  • Alloy Steel A234 WP11 Piggable Bend
  • A234 WP11 Alloy Steel Butt weld U Pipe Bend
  • A234 WP11 Alloy Steel Hot Induction Bend
  • Alloy Steel A234 WP11 Butt weld Seamless Bend
  • Alloy Steel A234 WP11 Pipe Bend
Butt weld Reducer
ALLOY STEEL A234 WP11 Butt weld Reducer
  • Alloy Steel A234 WP11 Butt weld Reducer
  • Alloy Steel A234 WP11 Pipe Reducers
  • A234 WP11 Alloy Steel Concentric Reducers
  • Alloy Steel A234 WP11 Eccentric Reducer
  • A234 WP11 Alloy Steel Butt weld Reducer
  • A234 WP11 Alloy Steel Reducer
  • Alloy Steel A234 WP11 Butt weld Seamless Reducer
  • Alloy Steel A234 WP11 Reducers
Butt weld Return Bends
ALLOY STEEL A234 WP11 Butt weld Return Bends
  • Alloy Steel A234 WP11 Butt weld Return Bend
  • Alloy Steel A234 WP11 180 Degree Return Bend
  • A234 WP11 Alloy Steel U Bend
  • Alloy Steel A234 WP11 Long Radius Return Bend
  • Alloy Steel A234 WP11 Weld Return Bend
  • Alloy Steel A234 WP11 Pipe Return Bend
  • Alloy Steel A234 WP11 Butt weld Seamless Return Bend
  • Alloy Steel A234 WP11 Buttweld Return Bend

ALLOY STEEL A234 WP11 Pipe Fittings Dimensions Standard

Nominal
Pipe
Size
Outside
Diameter
Caps Straight Tees Straight Crosses Stub Ends
(inches) (mm) (inches) Length
(inches)
Center to End
(inches)
Center to End
(inches)
Lap Diameter
(inches)
Long Length
(inches)
Short Length
(inches)
1/2 21.3 0.840 1 1 1 3/8 3 2
3/4 26.7 1.050 1 1 1/8 1 11/16 3 2
1 33.4 1.315 1 1/2 1 1/2 1 1/2 2 4 2
1 1/4 42.2 1.660 1 1/2 1 7/8 1 7/8 2 1/2 4 2
1 1/2 48.3 1.900 1 1/2 2 1/4 2 1/4 2 7/8 4 2
2 60.3 2.375 1 1/2 2 1/2 2 1/2 3 5/8 6 2 1/2
2 1/2 73.0 2.875 1 1/2 3 3 4 1/8 6 2 1/2
3 88.9 3.500 2 3 3/8 3 3/8 5 6 2 1/2
3 1/2 101.6 4.000 2 1/2 3 3/4 3 3/4 5 1/2 6 3
4 114.3 4.500 2 1/2 4 1/8 4 1/8 6 3/16 6 3
5 141.3 5.563 3 4 7/8 4 7/8 7 5/16 8 3
6 168.3 6.625 3 1/2 5 5/8 5 5/8 8 1/2 8 3 1/2
8 219.1 8.625 4 7 7 10 5/8 8 4
10 273.1 10.750 5 8 1/2 8 1/2 12 3/4 10 5
12 323.9 12.750 6 10 10 15 10 6

ALLOY STEEL A234 WP11 Pipe Fittings Thickness Chart

Product range and theoretical weights (kg)
DN Schedule 10S Schedule 40S Schedule 80S
900 Elbow 450 Elbow Equal tee 900 Elbow 450 Elbow Equal tee 900 Elbow 450 Elbow Equal tee
8 0.02 0.01 0.03 0.03 0.02 0.06 0.04 0.03 0.07
10 0.03 0.02 0.05 0.03 0.02 0.03 0.06 0.04 0.09
15 0.06 0.03 0.09 0.08 0.04 0.10 0.10 0.05 0.14
20 0.07 0.03 0.13 0.08 0.04 0.17 0.11 0.05 0.20
25 0.14 0.08 0.28 0.15 0.11 0.29 0.22 0.14 0.38
32 0.23 0.11 0.49 0.26 0.17 0.59 0.40 0.23 0.68
40 0.30 0.17 0.68 0.40 0.23 0.86 0.51 0.29 1.02
50 0.50 0.25 0.85 0.70 0.4 1.28 0.91 0.59 1.59
65 0.85 0.48 1.41 1.40 0.77 2.19 1.81 0.99 3.13
80 1.25 0.63 1.77 2.20 1.08 3.31 2.97 1.50 4.45
90 1.70 0.75 2.67 2.83 1.42 4.08 4.00 2.00 5.44
100 2.10 1.08 3.46 4.47 2.09 5.27 6.18 2.81 7.71
150 5.45 2.72 8.07 10.89 5.44 10.99 16.32 8.16 13.61
200 10.20 5.33 15.65 21.54 10.77 20.91 33.11 16.56 28.12
250 18.15 9.75 26.46 38.56 19.27 35.38 51.71 25.86 49.90
300 25.80 13.62 39.46 59.42 29.71 62.14 79.38 39.69 83.91

We Keep Bulk Stock Of ALLOY STEEL A234 WP11 Pipe Fittings At Our Stockyard, Contact Us For Free Sample & Stock List.

Chemical Composition of ALLOY STEEL A234 WP11 Pipe Fittings

Grade C Mn Si S P Cr Mo
A234 WP11 0.05-0.2 0.3-0.8 0.5-1 ≤0.030 ≤0.030 1-1.5 1-1.5

Mechanical Properties of ALLOY STEEL A234 WP11 Pipe Fittings

Grade Tensile Strength (Mpa) Yield Strength (Mpa) Elongation %
A234 WP11 415 – 585 ≥205 ≥20

For ALLOY STEEL A234 WP11 Pipe Fittings price list

Request the latest ALLOY STEEL A234 WP11 Pipe Fittings List. Please click on the request a quote button or click here to request the updated price list and ready stock information along with your requirement. Aashish Metal & Alloys maintains a stock of all standard items and can export them at best price for ALLOY STEEL A234 WP11 Butt weld Fittings.

We supply of variety ALLOY STEEL A234 WP11 Pipe Fittings

Aashish Metal & Alloys is a Highly Acclaimed Manufacturer & suppliers of Alloy Steel A234 WP11 Pipe Fittings offering all varieties in all types of Alloy Steel A234 WP11 in all sizes, with more then 52 countries worldwide.

Alloy Steel A234 WP11 Seamless Pipe Fittings Alloy Steel A234 WP11 Welded Pipe Fittings
A234 WP11 Alloy Steel Short Radius Elbow ANSI A234 WP11 Long Radius Elbows
ASTM A234 WP11 Pipe Fittings Price List Alloy Steel A234 WP11 Butt weld Fittings
SA234 WP11 Equal & Unequal Tee Alloy Steel A234 WP11 Pipe Fittings
A234 WP11 Alloy Steel 45 Degree Elbows Alloy Steel A234 WP11 Reducers
Alloy Steel A234 WP11 Butt weld Pipe Fittings SUS A234 WP11 Steel Pipe Cap
ASTM A234 WP11 Cross ASTM A234 WP11 90 Degree Elbow
SUS Steel A234 WP11 Long Stub End Alloy Steel A234 WP11 Reducing Nipple Expoter
A234 WP11 Stub End A234 WP11 Alloy Steel 3D, 5D Elbow
A234 WP11 Alloy Steel 180 Deg Elbows ASME/ANSI B16.9 Alloy Steel A234 WP11 Concentric Reducers
WERKSTOFF NR. ASTM A234 Gr WP11 Butt weld Fittings A234 WP11 Alloy Steel Eccentric Reducers
Alloy Steel A234 WP11 Pipe Nipples Alloy Steel A234 WP11 Bends
Alloy Steel A234 WP11 90° LR Elbow A234 WP11 Alloy Steel Butt weld Elbow Stock
A403 WPA234 WP11 Two Joint Pipe Fittings ASTM A234 Gr WP11 Seamless Pipe Fittings
ASTM A234 Gr WP11 Welded Fittings ASTM A234 Gr WP11 Caps
Alloy Steel A234 WP11 Pipe Fittings Manufacturers in India A234 WP11 Alloy Steel Lateral Tee
ASME B16.9 Alloy Steel A234 WP11 10D Elbow A234 WP11 Alloy Steel Two Halve Butt weld Fittings
ASME B16.9 Alloy Steel A234 WP11 Buttweld Fittings A234 WP11 Short Stub End Supplier
AISI A234 WP11 Buttweld Fittings Price List In India ASTM A234 WP11 Reducer

Application Of ALLOY STEEL A234 WP11 Pipe Fittings

Industry
We Serve

Application Industry

Automotive and aerospace industry, Chemical industry, Heat exchanger, Food processing equipment, Architectural trim and molding, Kitchen benches, sinks, equipmentrtc

For More Information About Alloy Steel A234 WP11 Pipe Fittings please call +91-22-66362223 / 66394926 or send an email to export@aashishmetal.com

Export Country

MIDDLE EAST

  Saudi Arabia
  Iran
  Iraq
  Uae
  Qatar
  Bahrain
  Oman
  Kuwait
  Turkey
  Yemen
  Syria
  Jordan
  Cyprus

AFRICA

  Nigeria
  Algeria
  Angola
  South Africa
  Libya
  Egypt
  Sudan
  Equatorial Guinea
  The Republic Of Congo
  Gabon

NORTH AMERICA

  Usa
  Canada
  Mexico
  Panama
  Costa Rica
  Puerto Rica
  Trinidad And Tobago
  Jamaica
  Bahamas
  Denmark

EUROPE

  Russia
  Norway
  Germany
  France
  Italy
  Uk
  Spain
  Ukraine
  Netherland
  Belgium
  Greece
  Czech Republic
  Portugal
  Hungary
  Albania
  Austria
  Switzerland
  Slovakia
  Finland
  Ireland
  Croatia
  Slovenia
  Malta

ASIA

  India
  Singapore
  Malaysia
  Indonesia
  Thailand
  Vietnam
  South Korea
  Japan
  Sri Lanka
  Maldives
  Bangladesh
  Mayanmar
  Taiwan
  Cambodia

SOUTH AMERICA

  Argentina
  Bolivia
  Brazil
  Chile
  Venezuela
  Colombia
  Ecuador
  Guyana
  Paraguay
  Uruguay

Aashish Metal & Alloys is a well known Manufacturer , Stockiest, Supplier and Exporter of Raw materials like Long Radius Bends, Compression Tube Fittings, Pipe Fittings, Forged Fittings, Flanges, Shims & Plates, Fasteners, Pipes & tubes, round Bars & Wire etc.

Mumbai - 400 004.
(Mon - Sat)
(10am - 07 pm)