ASTM A182 F53 Fasteners Manufacturer Supplier UNS S32750

ASTM A182 F53 Fasteners Manufacturer and Supplier of Bolts Nuts and Stud Bolts

Being a reliable manufacturer and distributor, Aashish Metals can provide a full selection of ASTM A182 F53 Fasteners that are used in an industrial environment of high requirements. Our A182 F53 bolts, nuts and stud bolts are very resistant to corrosion, chloride stress cracking and high-pressure environments. UNS S32750 Super Duplex grade is a grade that provides good mechanical performance and extended service life both in the marine and chemical environment as well as offshore. Our Grade F53 hex bolts are threaded and supplied in recommended sizes to suit project requirements in process piping, pumps, valves and structural assemblies. All fasteners are manufactured under high standards and also ensure compliance with international specifications and materials. Our A182 F53 Fasteners are chosen because of their reliability, strength and dimensional accuracy by engineers and procurement teams. Our product line will contribute to the assurance of safe setting up and reliable performance in key systems within the industry.

ASTM A182 F53 Super Duplex Stud Bolts, A182 F53 Threaded Rod, UNS S32750 Double Ended Studs, Super Duplex Grade F53 Tie Rod Stockist, ASTM A182 F53 Hex Bolt and Washer Supplier

ASTM A182 F53 Super Duplex grade is chosen in case of fasteners that should be able to exist in an aggressive environment, with high pressure flow and intense chloride exposure. It is a material that has a combination of high mechanical strength and pitting and stress corrosion cracking. We have A182 F53 stud bolts, threaded rods and double ended studs as well as hex bolts and heavy duty tie rods, which are suited to the challenging industrial systems.

UNS S32750 Super Duplex composition is an excellent choice to use in seawater, desalination plants, offshore platforms, chemical processing units and high temperature piping systems. The buyers dealing with process equipment depend on the strength of ASTM A182 F53 bolts and nuts, as well as their dimensional precision and extended service life. The ferritic/austenitic microstructure of Grade F53 provides better toughness and less corrosion potential as compared to the standard duplex grades.

Aashish Metals distributes a host of F53 washers, stud bolts and S32750 threaded rods in various sizes to valves, pumps, heat exchangers, marine hardware and so on. Every product is subject to stringent material requirements and is checked on the quality to assure uniform performance in corrosive media. Since we are a consistent stockist and supplier of Super Duplex F53 fasteners, we promote the needs of the projects as efficient and safe installation and high-quality performance.

The reliability of A182 F53 fasteners in critical industrial applications is due to the fact that engineers and procurement teams select these fasteners because of their high reliability in their service. Our related ASTM A182 GR F51 Fasteners and ASTM A182 GR F55 Fasteners also have ASTM A182GR F55 Fasteners.

A182 F53 Super Duplex Fasteners Dimensions and Standards

Specifications	Details
Specifications	ASTM A 182 / ASME SA 182
Grade	ASTM A182 GR.F53
Standard	DIN 931/912/975/976/2510, ISO 4014/4762, ASME B18.3/B18.2.1/B16.5/B18.2.3.6M and all International Standards
Threads Configuration	ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads
Type	Cold Forged, Hot Forged, Bar Stock Machined, Bar Stock Milling
Compatible Fasteners	Super Duplex Alloy 32507 Bolts \| Super Duplex 32507 Hex Bolts
Length	3 mm to 200 mm
Nuts Size	M3 – M56 \| 3/6″ to 2″ \| Custom Sizes
Bolts / Screw Size	M3 – M56 \| 3/6″ to 2″ \| Custom Sizes
Bolts, Studs Threads:	METRIC, BSW, BSF, UNC, UNF or as required
In Form of	Hex, Square, Round, Threading as per Gauge Etc.
Head drive	Phillips, Slotted, Phillips/Slot, Six-Lobe, etc
Bolts Size	M2, M2.5, M3, M4, M5, M6, M8, M10, M12, M14, M16, M20, M24, M30, M36 to M160
Machine Screws Size	M1.6 – M12
Washers Size	M3 – M56 \| 3/6″ to 2″ \| Custom Sizes
Additional Requirements	NACE MR0103/MR0175/ISO 15156 Compliance
Test Certificate:	Manufacturer Test Certificate as per EN 10204 / 3.1, Dual Certified As per ASTM & ASME Codes
Mandatory Requirements	Free from Mercury & Radioactive Contamination
Source of raw materials	Tata Steel, JSPL, RINL, Usha Martin, Dhamm Steel, Mukund Steel etc.
Scope Of Manufacture	Hot Forged , Nut / Bolt; up to M36 / 1-1/2” Dia, up to 1100mm lg CNC Machined , Nut / Bolt; up to M100 / 4” Dia, up to 1500mm lg
Super Duplex Steel Grades	Super Duplex Steel UNS S32750
Packing	IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request
Production process	M2-M24: Cold Froging, hot forging M24-M100, machining and CNC for Customized connecting element
Super Duplex S32750 Fasteners Standard:	ANSI – American National Standards Institute ANSI B 18.2.4 2M ANSI B 28.2.4 1M SS 304l Stud Bolt length are defined in ASME B16.5 standard SS 304l Hex nuts are defined in ASME B18.2.2 ASME B18.5 DIN: DIN 931, DIN 933, DIN 934, DIN 970 UTS – Unified Thread Standard : UNC, UNF, UNEF, UNS, NPT, NPTF ISO – International Organization for Standardization : ISO 4032, ISO 4033, JIS standards
Fasteners Type	Cap Screw, Machine Screw, Wing Screw, Spring Washers, Washers, Studs, Marine Anchors, Anchors, Hexagon Nut,U- Bolts, Anchor Bolt, Mushroom Head Square Neck Bolts, J Bolts,Eye Bolt,Structural Bolts, Bolts, Nuts, Sockets, Screws, Allen Cap screw,Nut, Hex Coupling Nut, Hex Nut, Square Nut, Hex Domed Cap Nuts, Hex Head Bolts, Stud Bolts, Socket Hexagon Head Screw, Pan Head Screw, Socket Head Cap Screw, Wing Screw, T-Head Bolts, Foundation Bolts,Screw, Studs, Socket Screw, Hex Set Screw

Equivalent Grades for ASTM A182 F53 Super Duplex Fasteners

STANDARD	UNS	WERKSTOFF NR.
Grade F53	S32750	1.4410

ANSI and ASME Standards for ASTM A182 F53 Fasteners Inch Series

ASTM A182 GR.F53 Fasteners Surface Coating

Xylon Coated Fasteners
Hot Dipped Galvanizing Coated Fasteners
Teflon Coated Fasteners
PTFE Coated Fasteners
Zinc Coated Fasteners
Phosphate Coated Fasteners
Cadmium Coated Fasteners

ASTM A182 GR.F53 Fasteners Standard

No.	Description
DIN 84	Slotted Cheese Head Machine Screws
DIN 85	Slotted Pan Head Machine Screws
DIN 94	Cotter Pin
DIN 125A	Flat Washer (without Chamfer)
DIN 125B	Flat Washer (with Chamfer)
DIN 127B	Split Lock Washer
DIN 137B	Spring Wave Washer
DIN 315	Wing Nut
DIN 439B	Machine Screws Hex Nut, Finished Hex Jam Nut
DIN 911	Long Arm Hex Key
DIN 912	Hex Socket Head Cap Screws
DIN 916	Hex Socket Set Screws
DIN 931	Hex Head Cap Screws Partially Threaded
DIN 933	Hex Head Cap Screws Fully Threaded
DIN 934	Finished Hex Nut
DIN 939	Double End Stud
DIN 960	Hex Head Cap Screws Partially Threaded
DIN 961	Hex Head Cap Screws Fully Threaded
DIN 963	Slotted Flat Head Machine Screws
DIN 964	Slotted Oval Head Machine Screws
DIN 965	Phillips Flat Head Machine Screws
DIN 966	Phillips Oval Head Machine Screws
DIN 975	Threaded Rod
DIN 980V	Hex Steel Prevailing Torque Lock Nut
DIN 985	Hex Nylon Insert Lock Nut
DIN 6334	Rod Coupling Nut
DIN 6797A	External Tooth Lock Washer
DIN 6797J	Internal Tooth Lock Washer
DIN 6912	Hex Low Socket Head Cap Screws
DIN 6921	Hex Flange Head Screws
DIN 6923	Hex Flange Nut
ISO 7379	Hex Socket Head Shoulder Screws
ISO 7380	Hex Button Socket Head Cap Screws
DIN 7985	Phillips Pan Head Machine Screws
DIN 7991	Hex Flat Socket Head Cap Screws

ANSI and/or ASME Standards Fasteners(inch series)

ASME B18.1.1	Small Solid Rivets	ASME B18.8.1	Clevis Pins and Cotter Pins
ASME B18.1.2	Large Rivets	ASME B18.8.2	Taper Pins, Dowel Pins, Straight Pins, Grooved Pins and Spring Pins
ASME B18.2.1	Square and Hex Bolts and Screws	ASME B18.9	Plow Bolts
ASME B18.2.2	Square and Hex Nuts	ASME B18.10	Track Bolts and Nuts
ASME B18.2.6	Fasteners for use in Structural Applications	ASME B18.11	Miniature Screws
ASME B18.3	Socket Cap, Shoulder and Set Screws	ASME B18.13	Screws and Washer Assemblies (Sems)
ASME B18.5	Round Head Bolts	ASME B18.15	Forged Eyebolts
ASME B18.6.2	Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws	ASME B18.17	Wing Nuts, Thumb Screws and Wing Screws
ASME B18.6.3	Machine Screws and Machine Screws Nuts	ASME B18.21.1	Lock Washers
ASME B18.6.4	Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws	ASME B18.22.1	Plain Washers
ASME B18.7	General Purpose Semi- Tubular Rivets, Full Tubular Rivets, Split Rivets and Rivet Caps	ASME B18.23.1	Beveled Washers

ASTM A182 Grade F53 Self Drilling Screws

ASTM A182 Gr F53 Panel Nuts

ASME SA182 Grade F53 Nuts

SA182 Gr F53 Carriage Bolt

ASTM A182 Gr F53 Eye Bolts

ASME SA182 Gr.F53 J - Bolt

ASTM A182 Grade F53 Square Nuts

A182 Gr F53 Acorn Nuts

ASTM A182 F53 Bolts Sizes and Dimensions

Nominal or Basic Product Diameter		E		F			G		H			J	LT (Thread Length)		Y
Nominal or Basic Product Diameter		Body Diameter		Width Across Flats			Width Across Corners		Head Height			Wrenching Height	For Screw Lengths	For Screw Lengths	Transition Thread Length
1/4	0.25	0.25	0.245	7/16	0.438	0.428	0.505	0.488	5/32	0.163	0.150	0.106	0.750	1.000	0.250
5/16	0.3125	0.3125	0.3065	1/2	0.500	0.489	0.577	0.557	13/64	0.211	0.195	0.140	0.875	1.125	0.278
3/8	0.375	0.375	0.369	9/16	0.562	0.551	0.650	0.628	15/64	0.243	0.226	0.160	1.000	1.250	0.312
7/16	0.4375	0.4375	0.4305	5/8	0.625	0.612	0.722	0.698	9/32	0.291	0.272	0.195	1.125	1.375	0.357
1/2	0.5	0.5	0.493	3/4	0.750	0.736	0.866	0.840	5/16	0.323	0.302	0.215	1.250	1.500	0.385
9/16	0.5625	0.5625	0.5545	13/16	0.812	0.798	0.938	0.910	23/64	0.371	0.348	0.250	1.375	1.625	0.417
5/8	0.625	0.625	0.617	15/16	0.938	0.922	1.083	1.051	25/64	0.403	0.378	0.269	1.500	1.750	0.455
3/4	0.75	0.75	0.741	1-1/8	1.125	1.100	1.299	1.254	15/32	0.483	0.455	0.324	1.750	2.000	0.500
7/8	0.875	0.875	0.866	1-5/16	1.312	1.285	1.516	1.465	35/64	0.563	0.531	0.378	2.000	2.250	0.556
1	1	1	0.99	1-1/2	1.500	1.469	1.732	1.675	39/64	0.627	0.591	0.416	2.250	2.500	0.625
1-1/8	1.125	1.125	1.114	1-11/16	1.688	1.631	1.949	1.859	11/16	0.718	0.658	0.461	2.500	2.750	0.714
1-1/4	1.25	1.25	1.239	1-7/8	1.875	1.812	2.165	2.066	25/32	0.813	0.749	0.530	2.750	3.000	0.714
1-1/2	1.5	1.5	1.488	2-1/4	2.250	2.175	2.598	2.480	15/16	0.974	0.902	0.640	3.250	3.500	0.833

ASTM A182 F53 Nut Sizes and Available Dimensions

Nominal or Basic Major Diameter of Nut Thread		Nuts Width Across Flats (F)			Width Across Corners (G)		Thickness ofHex Nuts (H)
Nominal or Basic Major Diameter of Nut Thread		Basic	Max	Min	Max	Min	Basic	Max	Min
1/4	0.2500	7/16	.438	.428	.505	.488	7/32	0.226	0.212
5/16	0.3125	1/2	.500	.489	.577	.557	17/64	0.273	0.258
3/8	0.3750	9/16	.562	.551	.650	.628	21/64	0.337	0.320
7/16	0.4375	11/16	.688	.675	.794	.768	3/8	0.385	0.365
1/2	0.5000	3/4	.750	.736	.866	.840	7/16	0.448	0.427
9/16	0.5625	7/8	.875	.861	1.010	.982	31/64	0.496	0.473
5/8	0.6250	15/16	.938	.922	1.083	1.051	35/64	0.559	0.535
3/4	0.7500	1-1/8	1.125	1.088	1.299	1.240	41/64	0.665	0.617
7/8	0.8750	1-5/16	1.312	1.269	1.516	1.447	3/4	0.776	0.724
1	1.0000	1-1/2	1.500	1.450	1.732	1.653	55/64	0.887	0.831
1-1/8	1.1250	1-11/16	1.688	1.631	1.949	1.859	31/32	0.999	0.939
1-1/4	1.2500	1-7/8	1.875	1.812	2.165	2.066	1-1/16	1.094	1.030
1-3/8	1.3750	2-1/16	2.062	1.994	2.382	2.273	1-11/64	1.206	1.138
1-1/2	1.5000	2-1/4	2.250	2.175	2.598	2.480	1-9/32	1.317	1.245
1-5/8	1.6250	2-7/16	2.438	2.356	2.815	2.686	1-25/64	1.429	1.353
1-3/4	1.7500	2-5/8	2.625	2.538	3.031	2.893	1-1/2	1.540	1.460
2	2.000	3	3.000	2.900	3.464	3.306	1-23/32	1.763	1.675
2-1/4	2.2500	3-3/8	3.375	3.263	3.897	3.719	1-15/16	1.986	1.890
2-1/2	2.5000	3-3/4	3.750	3.625	4.330	4.133	2-5/32	2.209	2.105
2-3/4	2.7500	4-1/8	4.125	3.988	4.763	4.456	2-3/8	2.431	2.319
3	3.000	4-1/2	4.500	4.350	5.196	4.959	2-19/32	2.654	2.534

ASTM A182 F53 Screw Sizes and Specifications

Screw Size	Body Dia	Hex Key Size	Head Height	Head Dia	Maximum Thread Length	Minimum Thread Length
No. 0	0.06	0.05	0.06	0.096	5/8	3/8
No. 1	0.073	1/16	0.073	0.118	7/8	3/8
No. 2	0.086	5/64	0.086	0.14	7/8	1/2
No. 3	0.099	5/64	0.099	0.161	7/8	1/2
No. 4	0.112	3/32	0.112	0.183	11/8	11/16
No. 5	0.125	3/32	0.125	0.205	1	11/16
No. 6	0.138	7/64	0.138	0.226	11/8	11/16
No. 8	0.164	9/64	0.164	0.27	11/4	3/4
No. 10	0.19	5/32	0.19	0.312	13/8	15/16
No. 12	0.216	5/32	0.216	0.345	11/4	15/16
1/4	0.250	3/16	1/4	3/8	11/2	15/16
5/16	0.3125	1/4	5/16	15/32	1-3/4	1-1/16
3/8	0.375	5/16	3/8	9/16	2	1-3/16
7/16	0.438	3/8	7/16	21/32	2-1/4	13/16
1/2	0.500	3/8	1/2	3/4	2-1/2	1-3/8
9/16	0.5625	7/16	9/16	27/32	2-7/16	1-5/8
5/8	0.625	1/2	5/8	15/16	3	1-5/8
3/4	0.750	5/8	3/4	11/8	3-1/2	1-7/8
7/8	0.875	3/4	7/8	15/16	3-3/4	2-1/16
1	1.000	3/4	1	11/2	4-1/2	2-1/4
1-1/8	1.125	7/8	1-1/8	111/16	4-21/32	2-13/16
1-1/4	1.250	7/8	1-1/4	17/8	5-3/32	3-1/8
1-1/2	1.500	1	1-1/2	21/4	6-5/64	3-3/4
1-3/4	1.750	11/4	1-3/4	25/8	7-1/8	4-3/8
2	2.000	11/2	2	3	8-7/64	5

ASTM A182 F53 Washer Sizes and Dimensional Range

Size	Inside Diameter	Outside Diameter	Thickness
#2	3/32″	1/4″	.020″
#4	1/8″	5/16″	1/32″
#6	5/32″	3/8″	3/64″
#8	3/16″	7/16″	3/64″
#10	7/32″	1/2″	3/64″
1/4	9/32″	5/8″	1/16″
5/16	11/32″	11/16″	1/16″
3/8	13/32″	13/16″	1/16″
7/16	15/32″	59/64″	1/16″
1/2	17/32″	1-1/16″	3/32″
9/16	19/32″	1-3/16″	3/32″
5/8	21/32″	1-5/16″	3/32″
3/4	13/16″	1-1/2″	9/64″
7/8	15/16″	1-3/4″	9/64″
1″	1-1/16″	2″	9/64″
1-1/8	1-3/16″	2-1/4″	9/64″
1-1/4	1-5/16″	2-1/2″	5/32″
1-1/2	1-7/16″	3″	3/16″
1-5/8	1-3/4″	3-3/4″	3/16″
1-3/4	1-7/8″	4″	3/16″
2	2-1/8″	4-1/2″	3/16″

ASTM A182 F53 Stud Bolts Sizes and Thread Dimensions

Class 150 Flanges ASME B16.5 (Stud bolt sizes)						Length of Stud Bolts
NPS	Outside Diameter of Flange	The diameter of Bolt Circle	The diameter of Bolt Holes	Number of Bolts	Diameter of Bolts	Raised Face 0.06 in	Ring Joint
1/2	3 1/2	2 3/8	5/8	4	1/2	2 1/4	–
3/4	3 7/8	2 3/4	5/8	4	1/2	2 1/2	–
1	4 1/4	3 1/8	5/8	4	1/2	2 1/2	3
1 1/4	4 5/8	3 1/2	5/8	4	1/2	2 3/4	3 1/4
1 1/2	5	3 7/8	5/8	4	1/2	2 3/4	3 1/4
2	6	4 3/4	3/4	4	5/8	3 1/4	3 3/4
2 1/2	7	5 1/2	3/4	4	5/8	3 1/2	4
3	7 1/2	6	3/4	4	5/8	3 1/2	4
3 1/2	8 1/2	7	3/4	8	5/8	3 1/2	4
4	9	7 1/2	3/4	8	5/8	3 1/2	4
5	10	8 1/2	7/8	8	3/4	3 3/4	4 1/4
6	11	9 1/2	7/8	8	3/4	4	4 1/2
8	13 1/2	11 3/4	7/8	8	3/4	4 1/4	4 3/4
10	16	14 3/4	1	12	7/8	4 1/2	5
12	19	17	1	12	7/8	4 3/4	5 1/4
14	21	18 3/4	1 1/8	12	1	5 1/4	5 3/4
16	23 1/2	21 1/4	1 1/8	16	1	5 1/4	5 3/4
18	25	22 3/4	1 1/4	16	1 1/8	5 3/4	6 1/4
20	27 1/2	25	1 1/4	20	1 1/8	6 1/4	6 3/4
24	32	29 1/2	1 1/4	20	1 1/4	6 3/4	7 1/4
Class 300 Flanges ASME B16.5						Length of Stud Bolts
NPS	Outside Diameter of Flange	The diameter of Bolt Circle	The diameter of Bolt Holes	Number of Bolts	Diameter of Bolts	Raised Face 0.06 in	Ring Joint
1/2	3 3/4	2 5/8	5/8	4	1/2	2 1/2	3
3/4	4 5/8	3 1/4	3/4	4	5/8	3	3 1/2
1	4 7/8	3 1/2	3/4	4	5/8	3	3 1/2
1 1/4	5 1/4	3 7/8	3/4	4	5/8	3 1/4	3 3/4
1 1/2	6 1/8	4 1/2	7/8	4	3/4	3 1/2	4
2	6 1/2	5	3/4	8	5/8	3 1/2	4
2 1/2	7 1/2	5 7/8	7/8	8	3/4	4	4 1/2
3	8 1/4	6 5/8	7/8	8	3/4	4 1/4	4 3/4
3 1/2	9	7 1/4	7/8	8	3/4	4 1/4	5
4	10	7 7/8	7/8	8	3/4	4 1/2	5
5	11	9 1/4	7/8	8	3/4	4 3/4	5 1/4
6	12 1/2	10 5/8	7/8	12	3/4	4 3/4	5 1/2
8	15	13	1	12	7/8	5 1/2	6
10	17 1/2	15 1/4	1 1/8	16	1	6 1/4	6 3/4
12	20 1/2	17 3/4	1 1/4	16	1 1/8	6 3/4	7 1/4
14	23	20 1/4	1 1/4	20	1 1/8	7	7 1/2
16	25 1/2	22 1/2	1 3/8	20	1 1/4	7 1/2	8
18	28	24 3/4	1 3/8	24	1 1/4	7 3/4	8 1/4
20	30 1/2	27	1 3/8	24	1 1/4	8	8 3/4
24	36	32	1 5/8	24	1 1/2	9	10

We Keep Bulk Stock Of ASTM A182 GR.F53 Bolts, Screws At Our Stockyard, Contact Us For Free Sample & Stock List.

Chemical Composition of ASTM A182 F53 Super Duplex Fasteners

Grade	C	Mn	Si	P	S	Cr	Mo	Ni	N	Fe
S32750	0.030 max	1.20 max	0.80 max	0.035 max	0.020 max	24.00 – 26.00	3.00 – 5.00	6.00 – 8.00	0.24 – 0.32	58.095 min

Mechanical Properties of ASTM A182 F53 Fasteners

Grade	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
S32750	7.8 g/cm3	1350 °C (2460 °F)	Psi – 116000 , MPa – 800	Psi – 80000 , MPa – 550	15 %

For ASTM A182 GR.F53 Fasteners price list

Request the latest ASTM A182 GR.F53 Fasteners List. Please click on the request a quote button or click here to request the updated price list and ready stock information along with your requirement. Aashish Metal & Alloys maintains a stock of all standard items and can export them at best price for ASTM A182 GR.F53 Fasteners.

We supply of variety ASTM A182 GR.F53 Fasteners

Aashish Metal & Alloys is a Highly Acclaimed Manufacturer & suppliers of ASTM A182 GR.F53 Fasteners offering more than 3000 varieties in all types of ASTM A182 GR.F53 in all sizes, with more then 52 countries worldwide.

UNS S32750 Anchor Bolts	ASTM A182 Gr.F53 Square Nuts Stockholder
Super Duplex Steel ASTM A182 Gr.F53 Stove Bolts Exporter	DIN 1.4410 Draw Bolt Traders
ASTM A182 Gr.F53 Hex Cap Screw	ASTM A182 Gr.F53 Hex Screw Supplier
Super Duplex Steel ASTM A182 Gr.F53 Self Drilling Screw	ASTM A182 Gr.F53 Eye Bolts Traders
ASTM A182 Gr.F53 Ogee Washers	ASTM A182 Gr.F53 Flat Washers Supplier
Gr.F53 ASTM A182 Fender Washer Exporter	ASTM A182 Gr.F53 Spring Washers
ASTM A182 Gr.F53 Self Tapping Screw	Super Duplex Steel ASTM A182 Gr.F53 Self Drilling Screw
Gr.F53 ASTM A182 Full Threaded Bolts	DIN 1.4410 Fasteners Manufacturer
ASTM A182 Gr.F53 Stud Bolts	Super Duplex Steel ASTM A182 Gr.F53 Allen Cap Screw
ASTM A182 Gr.F53 Heavy Hex Bolts	Super Duplex Steel ASTM A182 Gr.F53 Wing Nuts
ASTM A182 Gr.F53 Spring Washers Dealer	Gr.F53 ASTM A182 Countersunk Washer Exporter
ASTM A182 Gr.F53 Half Threaded Stud Bolt Supplier	ASTM A182 Gr.F53 Flange Bolts Distributor
ASTM A182 Gr.F53 Socket Cap Screw Exporter	ASTM A182 Gr.F53 Countersunk Slotted Screws
ASTM A182 Gr.F53 DIN 933 Bolts Exporter	DIN 1.4410 Allen Cap Screw Manufacturer
UNS S32750 Shoulder Bolt Supplier	Super Duplex Steel ASTM A182 Gr.F53 Self Tapping Screws
ASTM A182 Gr.F53 J Bolt Exporter	Super Duplex Steel ASTM A182 Gr.F53 U Bolt Stockist
ASTM A182 Gr.F53 Fasteners	UNS S32750 Fasteners
ASTM A182 Gr.F53 Bolts Exporter	Super Duplex Steel ASTM A182 Gr.F53 U Bolt
ASTM A182 ASTM A182 Gr.F53 Socket Cap Screw	DIN 1.4410 Fasteners Manufacturer
ASTM A182 ASTM A182 Gr.F53 Fastener	ASTM A182 Gr.F53 Bolts Supplier
ASTM A182 UNS S32750 Heavy Hex Bolts	Super Duplex Steel ASTM A182 Gr.F53 Countersunk Slotted Screw
ASTM A182 Gr.F53 Threaded Rod Exporter	ASTM A182 Gr.F53 Acorn Nuts Stockist
ASTM A182 Gr.F53 Nyloc Nuts	Super Duplex Steel ASTM A182 Gr.F53 Bolts Exporter
ASTM A182 Gr.F53 Screw	JIS NCF Gr.F53 Wing Nuts
ASTM A182 Gr.F53 Square Bolts Stockholder	UNS S32750 Coupling Nuts Distributor
ASTM A182 Gr.F53 Heavy Hex Nuts Dealer	ASTM A182 Gr.F53 J Bolts

Application Of ASTM A182 GR.F53 Fasteners

We Serve

Application Industry

Automotive and aerospace industry, Chemical industry, Heat exchanger, Food processing equipment, Architectural trim and molding, Kitchen benches, sinks, equipmentrtc

For More Information About ASTM A182 GR.F53 Fasteners please call +91-22-66362223 / 66394926 or send an email to export@aashishmetal.com

What Are ASTM A182 F53 Stud Bolts?

ASTM A182 F53 Stud Bolts are produced using Super Duplex stainless steel and are used in those applications where high strength and high degree of corrosion resistance is crucial. UNS S32750 grade of Super Duplex alloy is a combination of high mechanical properties and good pitting and chloride-stress corrosion cracking resistance. They are salient features that render the A182 F53 stud bolts desirable in offshore cords, desalination plants, chemical plants, and extreme sea conditions.

A182 F53 double ended studs, threaded rods and heavy stud bolts A secure connection in high-pressure systems, valves, pumps, heat exchangers and process equipment. Balanced ferritic austenitic structure enables them to retain their strength at high temperatures so that they can last many years in service despite its fluctuating pressure and hostile media.

Super duplex F53 tie bars and stud bolts are commonly used by engineers in assemblies in which reliability and dimensional stability are of utmost importance. High level of chromium and molybdenum in the material ensures a superior level of corrosion protection than the normal duplex grades particularly in a chloride-rich environment.

Aashish Metals being an esteemed manufacturer and supplier presents an entire collection of ASTM A182 F53 Stud Bolts in various sizes and configurations to satisfy the market requirements of numerous projects in oil and gas, petrochemical and marine industries.

Why Aashish Metals for F53 Fasteners?

Aashish Metals provides high-quality ASTM A182 F53 fasteners that will provide reliable services in severe industrial conditions. The bolts, nuts, washers, and stud bolts of our A182 F53 are fabricated out of high-grade Super Duplex UNS S32750 material so that they can have a high strength, resist corrosion, and have high dimensional accuracy.

Our production and supply process is monitored to ensure high quality standards are met at each step and our fasteners are of international quality pressure equipment, marine equipment, chemical plants and desalination plants. Every batch is examined on accuracy of threading, hardness, surface finish and mechanical property to ensure it has a long service life in the corrosion and high pressure service.

Having a large size selection, fast delivery opportunities and the possibility to deliver in large volumes project-related, Aashish Metals provides a reliable service to critical installations. We assume responsibility in our manufacturing and maintain consistency, which makes us a supplier of choice in the purchase of F53 Super Duplex Fasteners in various industries.

Frequently Asked Questions About ASTM A182 F53 Fasteners

What is ASTM A182 F53 material?

ASTM A182 F53 is a type of stainless steel that is a Super Duplex and a high strength grade with a great level of resistance to corrosion and high level of resistance to pitting and chloride stress corrosion cracking. It is widely applied when it comes to fasteners in offshore, chemical and desalination.

What are ASTM A182 GR F53 stud bolts?

Super Duplex fasteners are ASTM A182 GR F53 stud bolts, which are used in high pressure and high temperature services. They offer good mechanical properties and long term corrosion resistance in marine, chemical as well as oil and gas applications.

What is the difference between ASTM A182 F53 and F55?

ASTM A182 F53 and F55 are differentiated by their composition in alloys and resistance to corrosion. F55 contains a little more chromium and molybdenum which provides it with increased pitting resistance, whereas F53 provides excellent overall strength and service performance at a reduced cost.

What are the mechanical properties of ASTM A182 F53?

The mechanical characteristics of ASTM A182 F53 are high tensile strength, high yield strength, good elongation and excellent impact toughness. These characteristics endow it with the ability to be used in the critical fasteners that are subjected to pressure and subjected to aggressive media.

What is the equivalent material for ASTM A182 GR F53?

ASTM A182 GR F53 has the equivalent material UNS S32750, or Super Duplex 2507. It is equivalent in terms of chemical composition, corrosion resistance and mechanical performance in terms of worldwide material requirements.

Where are ASTM A182 F53 fasteners used?

ASTM A182 F53 types of fasteners are employed in offshore platforms, marine equipment, and desalination facilities, in heat exchangers, pumps, valves, and chemical processing plants, where a high level of corrosion resistance and strength is required.

Are ASTM A182 F53 fasteners suitable for seawater applications?

ASTM A182 F53 fasteners can be used in seawater due to the high resistance to pitting, crevice corrosion and chloride-induced damage in marines due to the UNS S32750 composition.

Export Country

MIDDLE EAST

  Saudi Arabia
  Iran
  Iraq
  Uae
  Qatar
  Bahrain
  Oman
  Kuwait
  Turkey
  Yemen
  Syria
  Jordan
  Cyprus

AFRICA

  Nigeria
  Algeria
  Angola
  South Africa
  Libya
  Egypt
  Sudan
  Equatorial Guinea
  The Republic Of Congo
  Gabon

NORTH AMERICA

  Usa
  Canada
  Mexico
  Panama
  Costa Rica
  Puerto Rica
  Trinidad And Tobago
  Jamaica
  Bahamas
  Denmark

EUROPE

  Russia
  Norway
  Germany
  France
  Italy
  Uk
  Spain
  Ukraine
  Netherland
  Belgium
  Greece
  Czech Republic
  Portugal
  Hungary
  Albania
  Austria
  Switzerland
  Slovakia
  Finland
  Ireland
  Croatia
  Slovenia
  Malta

ASIA

  India
  Singapore
  Malaysia
  Indonesia
  Thailand
  Vietnam
  South Korea
  Japan
  Sri Lanka
  Maldives
  Bangladesh
  Mayanmar
  Taiwan
  Cambodia

SOUTH AMERICA

  Argentina
  Bolivia
  Brazil
  Chile
  Venezuela
  Colombia
  Ecuador
  Guyana
  Paraguay
  Uruguay

ASTM A182 GR.F53 Fasteners

ASTM A182 F53 Fasteners Manufacturer and Supplier of Bolts Nuts and Stud Bolts