Super Duplex Steel Products

Home > Materials > Duplex & Super Duplex Steel Products

When your project demands materials that go beyond standard stainless steel, Super Duplex Steel is the answer. At Aashish Metals, we manufacture and supply a complete range of super duplex steel products engineered to perform in the world’s harshest industrial environments. Our super duplex stainless steel — available in grades UNS S32750 (2507) and UNS S32760 (Zeron 100) — combines an austenitic-ferritic microstructure with elevated levels of Chromium (24–26%), Molybdenum (3–5%), and Nitrogen, delivering a Pitting Resistance Equivalent Number (PREN) greater than 40. That means dramatically superior protection against pitting, crevice corrosion, and chloride-induced stress corrosion cracking compared to conventional 300-series stainless steels.

From super duplex pipes and tubes and round bars to flanges, fasteners, and instrumentation valves, Aashish Metals stocks a comprehensive product range that meets ASTM, ASME, and EN international standards. We serve industries including oil and gas, desalination, chemical processing, marine engineering, and pulp and paper — delivering certified material with full traceability, PMI reports, and heat charts on every order.

What is Super Duplex Steel?

Super Duplex Stainless Steel is a high-performance austenitic-ferritic iron-chromium-nickel alloy containing molybdenum, nitrogen, and in certain grades, copper and tungsten. Its two-phase microstructure — approximately 50% austenite and 50% ferrite — is what sets it apart from both standard austenitic and standard ferritic stainless steels.

The defining characteristic of super duplex is its elevated PREN (Pitting Resistance Equivalent Number), calculated as:

\text{PREN} = \%Cr + 3.3(\%Mo + 0.5\%W) + 16\%N

A PREN above 40 (super duplex achieves 40–45+) indicates exceptional resistance to localized corrosion in aggressive chloride-containing environments such as seawater and process chemicals.

How super duplex differs from standard duplex:

Property Duplex (S31803/S32205) Super Duplex (S32750/S32760)
PREN 34–37 40–45+
Tensile Strength ~620 MPa 750–800 MPa
Yield Strength ~450 MPa ~550 MPa
Chloride Resistance Good Excellent
Temperature Range Up to 250°C Up to 300°C
Typical Use General offshore Subsea, desalination, chemical
For projects where standard duplex steel pipes and tubes are sufficient, Aashish Metals carries those too — but when conditions demand higher PREN and greater tensile strength, super duplex is the engineering choice.

Duplex & Super Duplex Steel Products List

Aashish Metals supplies super duplex steel in virtually every product form, covering grades UNS S32750 and UNS S32760 across all major international standards.

Product FormGrades AvailableStandards
Pipes & TubesS32750, S32760ASTM A790 (seamless/welded), ASTM A789
Sheets, Plates & CoilsS32750, S32760ASTM A240, EN 10088-3
Round Bars & RodsS32750, S32760ASTM A276, ASTM A479
Pipe Fittings (Buttweld)S32750, S32760ASTM A815
Socket Weld FittingsF60, F55ASME B16.11
Threaded FittingsS32750, S32760ASME B16.11
Tube FittingsS32750, S32760ASME B16.11
Fasteners (Bolts, Nuts, Studs)F53, F55ASTM A182
Manifold ValvesS32750, S32760ASME / DIN
Needle & Gauge ValvesS32750, S32760ASME / DIN
Instrumentation Ball ValvesS32750, S32760ASME / DIN

We also stock duplex and super duplex steel pipe fittings and socket weld fittings in F60 and F55 grades for high-pressure instrumentation applications.

Technical Data

Why Super Duplex Steel Outperforms 304 and 316

Super duplex steels have a two-phase structure of austenite and ferrite in roughly equal parts. The austenite brings toughness and easy fabrication, and the ferrite brings strength and resistance to stress corrosion cracking. Compared with standard duplex, super duplex pushes chromium, molybdenum and nitrogen higher for tougher service.

FeatureWhat it means for your project
Roughly double the yield strength of 316LThinner walls for the same pressure, so lighter pipework and lower material cost
PREN above 40Reliable in seawater and chloride-rich process streams
Strong resistance to chloride stress corrosion crackingFar fewer failures in hot, salty service than austenitic grades
Good toughness at low temperatureExcellent impact toughness at −46 °C when impact testing is specified
Good weldabilityFabricates with standard methods when heat input and filler are controlled
Lower nickel contentMore stable pricing than high-nickel alloys
Long service lifeLower lifetime cost, even where the upfront price is higher

Super Duplex Steel Product Applications

Super duplex steel is the material of choice whenever a project combines aggressive corrosion, high pressure, and a demand for long, trouble-free service. Below are the sectors where it proves its value day after day.

Oil & Gas — Upstream and Midstream

Subsea pipelines, wellhead equipment, Christmas trees, umbilical tubing, and topside process piping all see sour gas (H₂S), CO₂, and chloride-laden produced water. Super duplex pipes and tubes rated to ASTM A790 / A789 are the standard solution. Pipe fittings, flanges, and manifold valves complete the system.

Desalination & Water Treatment

Reverse-osmosis membranes, high-pressure feed pumps, brine heaters, and concentrate disposal lines all contact seawater or concentrated brine. The PREN > 40 of super duplex prevents the crevice corrosion failures that plague 316L and even 904L in these environments.

Chemical & Petrochemical Processing

Phosphoric acid plants, acetic acid reactors, bleaching towers in pulp mills, and scrubber systems all benefit from super duplex’s resistance to reducing acids, oxidising acids, and mixed chloride-acid environments. Round bars are machined into pump shafts, impellers, and valve stems; sheets and plates line reactor vessels and heat exchanger shells.

Marine & Offshore

Propeller shafts, rudder stocks, deck fittings, seawater cooling systems, and ballast water treatment units in naval and merchant vessels all benefit from resistance to biofouling-driven corrosion and seawater pitting. Super duplex tube fittings are routinely specified for hydraulic and instrumentation lines on offshore platforms.

Power Generation

Flue-gas desulphurisation (FGD) scrubbers, condenser tubing in coastal power stations, and brine heaters in geothermal plants all operate in chloride-rich, fluctuating-pH environments. Super duplex performs reliably where titanium or high-nickel alloys would be the only alternative.

Pulp & Paper

Bleach plant piping, digester fittings, and chlorine dioxide lines are historically the domain of super duplex and high-alloy stainless. The combination of oxidising bleach chemicals and elevated temperatures rules out most cheaper grades.

Pharmaceutical & Food Processing

High-purity water loops, CIP (clean-in-place) piping, and heat exchangers in sterile manufacturing use super duplex when product purity and surface finish are non-negotiable and standard 316L does not meet corrosion budget over the asset life.

Industry Typical Products Used
Oil & Gas Pipes, tubes, flanges, valves, fittings
Desalination Pipes, heat exchanger tubes, fittings
Chemical Processing Plates, bars, fittings, fasteners
Marine & Offshore Pipes, tube fittings, instrumentation valves
Power Generation Tubes, plates, flanges
Pulp & Paper Pipes, fittings, valves
Pharma / Food Tubes, fittings, round bars

Why Choose Aashish Metals for Super Duplex Steel Products?

There are dozens of stainless steel distributors out there. Here is why engineering teams, EPC contractors, and procurement managers keep choosing Aashish Metals for their super duplex requirements.

Stocked in Multiple Product Forms

We maintain ready inventory across the full product range — pipes & tubes, round bars, sheets & plates, pipe fittings, flanges & fasteners, valves, and instrumentation fittings. You source your complete bill of materials from one trusted supplier, which simplifies certification management and consolidates freight.

Mill-Certified Material

Every product ships with a mill test certificate (MTC) issued under EN 10204 3.1 or 3.2. The certificate records heat number, chemical composition, mechanical test results, and dimensional compliance — everything your QA team and the end-client’s inspector need.

Third-Party Inspection Ready

We welcome TPI agencies such as Bureau Veritas, SGS, Lloyds, DNV, and TÜV on our premises. Inspection co-ordination is handled by our quality team, and we can arrange witness testing, PMI (Positive Material Identification), radiography, and hydrostatic testing through certified laboratories.

Competitive Lead Times

For standard sizes in S32750 and S32760, our typical ex-works lead time is 3–7 working days. For special sizes or high-volume orders, we work with our network of ISO-certified mills in Europe, India, and Asia to fulfil requirements without compromising material pedigree.

Technical Support from Specialists

Our team includes metallurgists and application engineers who understand corrosion engineering, pressure equipment directives (PED), NACE MR0175 / ISO 15156 requirements, and duplex fabrication best practice. When your project faces a materials challenge, we can help — not just quote.

Export-Ready Packaging

All products are packed for sea freight, air freight, or road transport with proper end-caps, waterproof wrapping, and wooden crating where required. Packing lists, COAs, and all shipping documents are issued in formats accepted by customs authorities worldwide.

Our commitment: Every kilogram of super duplex steel that leaves our warehouse is the material on the certificate — no substitution, no mixing, no compromise on traceability.

FAQ’s About Super Duplex Steel Products

The price of super duplex steel varies based on grade, product form, size, quantity and current raw material costs. Contact us for the latest price based on your exact requirement.

UNS S32750 is a super duplex stainless steel grade, commonly known as 2507. It offers high strength along with excellent resistance to chloride corrosion and stress corrosion cracking.

Super duplex steel generally contains higher chromium, molybdenum and nitrogen than standard duplex grades. This provides higher strength and improved resistance to pitting, crevice corrosion and chloride environments.

Yes, super duplex stainless steel is magnetic because it contains a significant ferritic phase. Its magnetic response is generally stronger than that of fully austenitic stainless steel.

Common super duplex grades include UNS S32750 (2507) and UNS S32760. The applicable material code depends on the grade and product standard specified for the application.

The hardness of duplex stainless steel varies by grade, product form and heat treatment. For many duplex grades, hardness is commonly specified around 250 HB or higher, subject to the applicable material standard.

Get a Fast Quote on Super Duplex Steel Products

Stop searching. You have found a supplier who stocks the full range, ships with full mill certification, and answers technical questions without making you wait for a sales rep to pass your query down the chain.

Our team will come back with a competitive price, confirmed lead time, and full documentation details — no vague estimates, no hidden charges.

Aashish Metals — Your Trusted Source for Super Duplex Steel Pipes, Fittings, Plates, Bars, Valves, and Fasteners.

For More Information About Duplex and Super Duplex Stainless Steel Products please call +91-22-66362223 / 66394926 or send an email to export@aashishmetal.com

Products

Have Any Questions ?

Please feel free to contact us. We will get back to you with 2 business days. Or just call us now.

 

logo

Aashish Metal & Alloys is a well known Manufacturer , Stockiest, Supplier and Exporter of Raw materials like Long Radius Bends, Compression Tube Fittings, Pipe Fittings, Forged Fittings, Flanges, Shims & Plates, Fasteners, Pipes & tubes, round Bars & Wire etc.

Mumbai - 400 004.
(Mon - Sat)
(10am - 07 pm)
Enquire Now
close slider

    Get In Touch

    Your information will be securely sent to and stored in Google Sheets for the purpose of processing your form submission.